Search results

  1. J

    No start on Laredo 3.7

    Have someone test the fuel pressure, I think it should be at 50 psi. The fuel pump is inside the tank so it is no fun to replace
  2. J

    What did you do to your jeep today?

    I plugged tires on my uncles Chevy truck and Jeep Cherokee in the same week, both objects bearly made it through the tire, one appeared to be a rusted drywall screw and the other may have been a fancy thumbtack
  3. J

    What did you do to your jeep today?

    Never found a kitten but it may have taken off when the serpentine belt flew off. I replaced the other pulley on the tensioner this morning even though it spun fine, likely needed it after 190k miles
  4. J

    What did you do to your jeep today?

    I was going to ask what would sound like an angry kitten under my hood but I found out shortly after leaving work. First the power steering quit, a block later the battery light came on, but I was only a couple blocks from O'Reilly's, the grooved pulley on the belt tensioner locked up. Fixed...
  5. J

    New here with 06' liberty

    I guess ball joints failing might bemore common than I expected. The drivers side failed on mine a couple years ago in my driveway
  6. J

    Assorted interior lights staying on post-battery-drain and recharge…

    You might need to replace the BCM, it is part of the interior fuse panel. The drain tube from the sunroof failed somewhere and should also be fixed or the replacement BCM may fail too. I never intended to make you think the doors needed to stay open, but the BCM allows power to some devices...
  7. J

    Assorted interior lights staying on post-battery-drain and recharge…

    You don't need to leave the doors open. The BCM allows a few things to still work after the key is turned off(power windows) until 10 minutes have passed or a door opened. I can leave the headlights on on my LIberty and it will shut them off after 10 minutes, same with the interior lights...
  8. J

    Assorted interior lights staying on post-battery-drain and recharge…

    It is only an issue if the clock and the lights on those windows switches are on with the ignition switch off and a door open. The clock on my 2006 isn't shown with the key off and the lights on the windows buttons go off when the door is opened with the ignition switch off
  9. J

    Assorted interior lights staying on post-battery-drain and recharge…

    A USB charger in the cig lighter port shouldn't drain a battery unless you are drawing a lot of power through it. I leave mine plugged in in my 2006
  10. J

    Assorted interior lights staying on post-battery-drain and recharge…

    Might need to replace the electrical part of the ignition switch My clock and lights on the window switches are on with the ignition switch in accessory position
  11. J

    What did you do to your jeep today?

    Studded tires aren't allowed for common people in this state. The P rated Firestone Winterforce tires I have are made to be studded
  12. J

    Rear brake backing plates, almost $400 what gives?

    I thought the 2 piece replacements were expensive-don't have to remove an axle to install, then I saw the OEM version was just as expensive
  13. J

    Drivers side clunking

    Upper control arm bolts might not be torqued enough, the rear ones aren't the easiest to get to Whoops, didn't realize this was on a KK, I have only worked on KJ UCA's
  14. J

    What did you do to your jeep today?

    The I used looked like https://a.co/d/8AQfyZb Never know how long the ones from Amazon will last
  15. J

    What did you do to your jeep today?

    You likely need the passenger side cat
  16. J

    Strut Spacers. Are these stock?

    No pictures on rockauto for that assembly show those aluminum spacers for a CRD and I know the 3.7's don't have them in 2006
  17. J

    What did you do to your jeep today?

    If you ever have to do B1S1, remove the sensor from exhaust and reach behind the rear of the engine near the firewall and pull it up through there
  18. J

    What did you do to your jeep today?

    I would replace both bank 2 sensors just in case your attempt to fix contaminated them and now are both giving false results. I know the upstream sensors are a pain to replace
  19. J

    New headlights?

    What is wrong with the wiring? The standard bulbs in the US are 55/65 watt bulbs, 14 guage wires can handle that
Top