Search results

  1. jeeptorino68

    Crank case vent hoses

    Nope,never did replace anything Thanks for the reminder!
  2. jeeptorino68

    steering rack cradle bolt top of bushing worn

    I have those bushings. They are well worth it. They were tricky to install in the garage but I didnt fully take the rack out.
  3. jeeptorino68

    Manual Transmission and SelecTrac (Full-time 4X4)

    You will find the NP242 (or NV242) plenty strong. Versions of it with minor upgrades are offered behind V8 engines in a variety of mopar vehicles abd the J version in all kinds of jeeps. It will definitely hold up behind your trans. No idea on the wiring or input shaft though. But sounds correct...
  4. jeeptorino68

    AC leak

    Thanks for the tips everyone. What a pain in the neck. The frustrating part is that it worked great before my engine swap....
  5. jeeptorino68

    Free Insulators

    PM sent
  6. jeeptorino68

    AC leak

    Hey everyone When we replaced the engine in my 2002, the ac lines were disconnected from the condensor. Since then, I cannot get the system to seal and keep a charge. The only 2 lines disconnected were the 2 hoses at the top of the condensor. Then when I couldnt get that sealed and holding a...
  7. jeeptorino68

    P1281 After Heater Core and Thermostat Replacement

    Is the thermostat in the right direction?
  8. jeeptorino68

    Water Pump Gasket 3.7L--Is RTV necessary?

    No rtv onthe ones I have replaced on my 4.7 grand cherokee and 3.7 liberty. No leaks
  9. jeeptorino68

    stopping the dribble

    Save the time and replace the radiator
  10. jeeptorino68

    First post suspension related .... and a question.

    I have the file for a top plate spacer if you want to pm me your email address
  11. jeeptorino68

    CB Installation Questions (Using factory antenna mount)

    My thread on making an antenna mount: https://www.jeepkj.com/threads/cb-antenna-mount-kj.63816/ The photo embeds are broken but here is the Photo album: https://www.jeepkj.com/media/albums/cb-antenna-mount.989/
  12. jeeptorino68

    Skid plates

    Here is what I did, last post has a link to pics http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=81535
  13. jeeptorino68

    Skid plates

    Pros: fitment, not many other options Cons: cost Another con, if you have an early model the transmission skid wont bolt up. But it can be easily modified to bolt up. But you didnt list what year you have.
  14. jeeptorino68

    Check the gas and fill the oil

    Thats a lot of consumption... Id also check the pcv system. If clogged that could cause increased consumption I believe.
  15. jeeptorino68

    greaseable suspension parts?

    They are just stock length unfortunately
  16. jeeptorino68

    HD Fan Clutches

    Here is how to mod the fan shroud to get it out easier https://www.jeepkj.com/threads/hd-fan-shroud-mod-for-quick-removal.59988/
  17. jeeptorino68

    greaseable suspension parts?

    Mevotech terrain tough upper control arms are greasable (well the ball joint is anyways....)
  18. jeeptorino68

    Overheating

    Hey now! I resemble that remark lol
  19. jeeptorino68

    Overheating

    Usually.... When the vehicle overheats while sitting still you have an airflow problem such as a bad fan. If it overheats while driving. Look for a coolant flow problem. Check the fan operation as mentioned above
  20. jeeptorino68

    Overheating after longer drives and highway speed

    Thermostat was installed backwards! Ug Put in a motorad ultrastat all is well again aside from some air to work out of the system

Random media

The first Jeep I've ever owned. 2007 KJ Sport (stock). New to me 1.07.2011.
Overland trailer3
Old vs new rear shock
fully skidded
4283.jpg
Willys mod.463 wagon I have a recollection of my dad borrowing one several times, must have been when I was 4 or 5 (1952/3). Always liked that 4WD
Before lift
IMG 0590
IMG 0010

Latest posts

Members online

Total: 220 (members: 4, guests: 216)
Top