Search results

  1. richar43

    Lift Progression

    it wouldn't hurt to hit the swaybar link blots, both the lower and upper. I removed the lower to begin with, then just to make it a little easier, I removed the upper as well, it was a lot easier to do stuff with that linkage out of the way...just FYI
  2. richar43

    Brake line relocation bracket

    I wanted to do the OME/Rancho setup w/ shims and the isolators, but the factory struts and rear shocks only have 24k on them, so when they are about shot, then I will replace them......
  3. richar43

    Brake line relocation bracket

    I agree, they were very easy to make, and work perfectly also. Glad it was easy for you, looking forward to see picks when it is complete, by the way are you doing the wesway lift?, i can't remember?
  4. richar43

    Wesway lift installed today

    lol, thanks for the response, you actually cant tell the difference, the only reason i know of the difference, is due to I measured them, but yes I'm happy at how easy it was to do..
  5. richar43

    Wesway lift installed today

    wow, 36 views, and no comments..... did i forget my deodorant today....lol.... One question for anyone, pertaining to my measurements after lift, and I have read others as well, but the 1/2 difference from front to rear isn't to bad, from what I have seen posted from others? am I correct?
  6. richar43

    Actual Lift Amount - Lets Compare Fender Heights

    2007 liberty sport w/ 24,600 miles on it Installed Wesway lift w/ Boilers 3/8 plate, 3/8 clevis lift & 2 addtl. isolators on the rear Before lift Both front .... 18.5 Both rear.......19.0 After lift Both front..... 19.5 Both rear.......20.00 After lift
  7. richar43

    Lift Progression

    I actually didn't have to remove either of the ball joints, basicly I removed the following... sway bar link, completely, clevis, and the strut, just had to do a little of jimmying the parts around, nothing to terrible, it was quite easily actually.
  8. richar43

    Brake line relocation bracket

    I used two 1/4 20 bolts 3/4 inch in length, worked perfectly, also remove the lines from the plastic holding bracket that is next to the area where it goes upward, as you are doing the rear end lift, just let them hang with slack, then after they are on the new ext. mounts, just gently flex the...
  9. richar43

    Brake line relocation bracket

    great How to, for the rear brakeline relocation brackets, for 06 & 07 KJ's, I just made the same brackets myself, for my 07, the only thing i did different was when I folded the ends over, I welded them as well. Other than that they work perfectly, and are easy to make as well.
  10. richar43

    Wesway lift installed today

    i installed the Wesway lift today, and all I have to say is his write-up was excellant, it made it very easy do the install with, great job man. Here is a few observations i did notice pertaining to my 07 When doing the rear, un-bolt the rear brake lines, to allow for flexing of the rear...
  11. richar43

    Ryan's Jeep Wrecking Yard Discovery

    Dave, Have you tried Dutchers , in Morrisville NY, They are located about 40 min from where I live. Here is the site info, and maybe it will help you find what you are looking for. http://www.dutchersinc.com/
  12. richar43

    How many miles on your KJ???

    bought mine in Feb of this year, 07 with 21,500 on it at time of purchase, now I have 24,224, there abouts...
  13. richar43

    Confused about your front end lift measurements - you guys

    I own a 07 liberty and here are the following heights stock w/ 24,600 miles on it Front 18.50 Rear 19.00 I will be doing the wesway lift this sat. so I will have new measurements then. I hope this helps you
  14. richar43

    Anyone need any parts?

    Nice find... thanks for the info...
  15. richar43

    rancho shock ? rsx 17004

    wow, then I guess I'll continue searching for the ever elusive rsx 17004 then... thanks for the added info
  16. richar43

    rancho shock ? rsx 17004

    thank you, that was very helpful info...
  17. richar43

    rancho shock ? rsx 17004

    I have been doing alot of reading, and know that the rsx 17004 is recommended for the rear shock replacement, and i figured if I'm already do the wesway lift, I might as well replace the rear shocks anyways. I also already asked rancho as well what to use in place of the 17004, but no answer...
  18. richar43

    The Little Things

    Well, since I first saw a liberty in 2002, I always wanted one, just couldn't afford one, this was when I owned a neon... then I went thru the stage of wanting a yj, which i did own for several years, but in Feb of this year I decided to upgrade and began looking at the liberty again, and now I...
  19. richar43

    EVIC's Wiring harnesses and parts FOR SALE!

    question about the evics, if and when i plan on adding one of these to my 07 liberty, do i need a 07, or am I able to use a different year?
  20. richar43

    Brushguard options for 07 liberty sport

    Thanks bmrrwolfe, for the info on your thread, and it looks like on mine, I can do the same minor trimming as well.

Random media

image my wife got my a allsome birthday gift
Finished product
Checkin out jobsites with dad
IMG 2409
001001
Enjoying the sunset on the way out to the bar. I'm thinking he wants his name to be Mr. Darcy... Sexy, Arrogant, and Mysterious.
02C8C769-2921-4DF9-BFCF-9579BC223D2F.jpeg
car1
Daytona Beach, Fl nov 2008

Latest posts

Members online

No members online now.
Total: 282 (members: 0, guests: 282)
Top