Actual Lift Amount - Lets Compare Fender Heights

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OHIO04KJ

Full Access Member
Joined
Aug 20, 2009
Messages
117
Reaction score
0
Location
Stow, Ohio
04 LTD 3.7 auto
235/65/17
Skyjacker springs, Rancho shocks, 3 washer clevis, 1 extra isolator
Both front = 20 1/2
Both Back = 21 1/2
 

Spidey

Full Access Member
Joined
Aug 28, 2008
Messages
147
Reaction score
0
Location
Charlotte, NC
Finally got around to measuring mine...

02 Sport 4x4 3.7l auto
245/75 Treadwright MT/Rs
Daystar 2.5" spacers and 3/8" clevis lift
Stock springs and shocks all around, no rear spring isolators(going back in today)
Front and back both sides: 22"
 
Last edited:

Boiler

New Member
Joined
Feb 18, 2009
Messages
506
Reaction score
1
Location
Muncie Indiana
Front
OME 927 HD spring
Rancho RSX 17505 struts
Boiler's top plate shims
Currently no clevis lift
Front height: 22"

Rear
OME 948 HD springs
Rancho RSX 17004 shocks
two extra lower isolators per side
Rear height: 23"
 

bigBlue

Full Access Member
Joined
Jun 30, 2009
Messages
219
Reaction score
2
Location
Trinity/Tampa, FL
2004 jk with 2.5" daystar in front and rear, procomp shocks in rear:
Front = 21" on the money
Rear = 20.25 driver, 20.5 passenger
55k miles (18k on lift)

Just Installed RRO UCA's and Do-it-urself Frankie
RSX17505
OME927
Rusty .75" spacer
Daystar top plate
Stock upper iso

22.75" L and R front on the money
 

Uncle Krusty

Full Access Member
Joined
Nov 23, 2008
Messages
207
Reaction score
0
Location
San Tan Valley, AZ
2006 LIBERTY LIMITED w/ 70,000 miles
All stock
Added recieved hitch


Before lift
18 1/2" on all four corners

Lift: (Added 2 weeks ago)
Front OME 926 (medium) / Rancho RSX struts
Rear OME 948 (medium) / Rancho RSX shock

After lift
21 1/2" on all four corners

Granted, it hasn't completely settled yet, and I probably had lost at least 1" to sag, but a solid 3" lift from before - not bad.

Even with no lift I would definately do it over again just for the vast gain in ride & handeling. Feels like a new car again.

Now for some new tires....
 

Red Dog

New Member
Joined
Apr 8, 2010
Messages
24
Reaction score
0
Location
So-Cal
2006 Sport
15,000 miles
3/8" clevis lift
225.75.16 Goodyear Wranglers
Mopar skid plates
Front fender height 19.5"
Rear fender height 18.75"
 

Porkchop

Full Access Member
Joined
Jan 24, 2010
Messages
1,285
Reaction score
3
Location
Troy Mi
2006 LIBERTY LIMITED w/ 70,000 miles
All stock
Added recieved hitch


Before lift
18 1/2" on all four corners

Lift: (Added 2 weeks ago)
Front OME 926 (medium) / Rancho RSX struts
Rear OME 948 (medium) / Rancho RSX shock

After lift
21 1/2" on all four corners

Granted, it hasn't completely settled yet, and I probably had lost at least 1" to sag, but a solid 3" lift from before - not bad.

Even with no lift I would definately do it over again just for the vast gain in ride & handeling. Feels like a new car again.

Now for some new tires....

(lol) He said carvertel.gif
 

Ry' N Jen

Banned
Joined
Dec 26, 2006
Messages
9,242
Reaction score
13
Location
Slightly North of the 49° th. Parallel... In HongC
Good day all,

189633.0 Km/117832.48 miles...
Thats 9333 Km/ 5799.257.34 miles later!
With the Frankenlift/clevis lift installed {Including 2 rear ISO's per side in the rear.
These are the stats.
Drivers side front 23.5 inches
Drivers side rear 22.5 inches
Passengers front 23.5 inches
Passengers rear 22.5 inches

Thats 5.5 inches deferents!
After machining 3/8 {0.375 inch = 9.525 millimeter*} off of the inner CV Joints, with NO complaints(Yet) from the inner CV Joints.
The ride is very smooth and ultra firm. I feel like I'm driving a new vehicle!
Instead of hitting an undulation in the road surface or one off road like I did with the Factory suspension, now our KJ just "Trucks" over it without a hick-up or the feel of the front coil springs "Stacking"
This Frankenlift is F cking awesome!

My skids are still on back order for some reason, so that will be later to come!

Cheers
Ry'

*OK, so I machined an add "C" hair or two... I have an extra 4 sets of inner CV Joints to play with!
So If I Ef a pair up... OH WELL!

The only thing that has Jen concerned is the noise of the front coil springs "Breaking in"!
A little bit of groaning never hurt a virgin... 4X4 vehicle one bit!

Cheers
Ry'

So, it's been nine months, nine days and 9979.9 miles since installing the Frankenlift on our Liberty.

The measurements here reflect all the coil spring settling:

Front end: 22.25 inches*
Rear end : 21.25 inches*
*from bottom of front and rear fender flare to hub center of wheel.

I have MINIMAL rubbing only or lock to lock right hand steering.
Other than that, all is excellent!

Cheers
Ry'
 

Auberon

Full Access Member
Joined
Aug 18, 2009
Messages
78
Reaction score
0
Location
Sydney, Australia
You do know you folks are flying in the face of the designers.:D
I remember reading in that @#$#%^! manual that they chose the original suspension height for aesthetics.
Go figure.
Auberon
 

SurfGuitar141

Full Access Member
Joined
May 10, 2010
Messages
1,767
Reaction score
2
Location
On the banks of the Insane River
2005 Renegade / 29,650 miles / Daystar 2.5" lift on stock springs, struts, and shocks.....No clevis or extra spacers added.....

Passenger Front = 21 3/8"
Driver Front = 21 1/4"
Passenger Rear = 21 1/4"
Driver Rear = 21"

Note: these measurements may not be 100% accurate since the Jeep was parked on an uneven surface.....
 

richar43

Full Access Member
Joined
May 1, 2010
Messages
141
Reaction score
3
Location
Upstate NY
2007 liberty sport w/ 24,600 miles on it
Installed Wesway lift w/ Boilers 3/8 plate, 3/8 clevis lift & 2 addtl. isolators on the rear

Before lift
Both front .... 18.5
Both rear.......19.0

After lift
Both front..... 19.5
Both rear.......20.00

After lift
 

KYLiberty

Full Access Member
Joined
Oct 14, 2008
Messages
527
Reaction score
0
Location
Kentucky
Just measured mine. It's had the Frankenlift II with OME HD's all around for a litlle over 2.5 years. It also has an extra set of iso's in the rear.

21" at all 4 fenders.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,650
Location
Southeastern Ohio
After 13000 miles on the new and improved Mudd lift still at 23.25 in front 22 in rear and thats with very worn out clevis bushings in front
 

osufans

Full Access Member
Joined
Nov 19, 2009
Messages
563
Reaction score
1
Location
Central Ohio
2004 Sport
OME 926/948, Rancho RSX shocks
70k miles on Jeep, 200 miles on the lift
Front Fender Height: 21.5
Rear Fender Height: 22.75

Ride is incredible! Only negative from this lift is now I have a squeaky bushing in the front right. Driving me NUTS!!! :)
 

speedracerbubba

Full Access Member
Joined
Oct 28, 2009
Messages
720
Reaction score
1
Location
408
06 sport
51,000miles
daystar 2.5" on for about 7k miles.
both front 21"
left rear 21.5"
right rear 22"

Work was slow today so I did my OME/Rancho with 1 extra iso in rear and boiler plate in front and the rear is slightly higher than the front and the pass side rear is 3/4" higher than the driver side (measured with less than 1/4 tank of gas. I gassed up on my way home so I will measure again and write them down this time)
 
Last edited:

Latest posts

Members online

Top