Search results
-
A
Cylinder Misfire
Mine went to the dealer last month with p0300 - p0306 codes - I knew it wasn't the plugs or coil packs, These 2 codes would come and go for about 2 years but within the last 4 months they stayed on. Anyway they determined it was internal and ended up changing the intake valves ( all 6 ) as...- adamkrz
- Post #3
- Forum: KJ General Discussion
-
A
Bought our second KJ - Bad news
Just got it back, All new intake valves and all the other parts to remove and replace, On the work sheet it states that the valves were pitted.Done under warranty w/100 deductable. Well I guess I'm a happy camper, Glad to have the jeep back.- adamkrz
- Post #57
- Forum: KJ General Discussion
-
A
Bought our second KJ - Bad news
Dealer has had mine for 2 days , No news yet, Also have 2 cracks in my windshield that may wait till winters over with.- adamkrz
- Post #55
- Forum: KJ General Discussion
-
A
Bought our second KJ - Bad news
Mine went in to the dealer Fri. for p0300 & p0306 codes, I've had these on and off for a couple of years and it wasn't the plugs or coil packs, It ran perfect so I never bothered with it. Anyway they called and said it was internal and covered under the 7/70 warranty, That's great because I...- adamkrz
- Post #50
- Forum: KJ General Discussion
-
A
How often...
The Bearings are sealed and can't be repacked.- adamkrz
- Post #3
- Forum: KJ General Discussion
-
A
Off-Roading w/a 5-Speed
Ditto here, I would not have bought my KJ if the dealer couldn't find a manual trans. I have nothing against the automatic drivers here but for myself I've had nothing but poor luck with the auto trans. Both of my last cars needed new tranny's when I traded them in ( MAZDA ) ( HONDA ), I...- adamkrz
- Post #34
- Forum: KJ General Discussion
-
A
Bought our second KJ - Bad news
Keep us informed, I've had an ongoing p300 & p306 code for a couple of years now, It's not the plugs or coil packs for mine, It runs really good with no noticeable misses. Anyway I was told it was most likely carbon buildup from the dealer before they went out of buisness last year, I have...- adamkrz
- Post #19
- Forum: KJ General Discussion
-
A
Cragar Soft 8's (Yes Another Soft 8 Thread)
Yes, Put on new valve stems. Yes use your old lug nuts, I have the 16 x 8 soft 8's but I think the 16 x 7 may be better.- adamkrz
- Post #2
- Forum: Tires / Wheels
-
A
Another noise diagnosis
I would first jack up 1 tire at a time and spin each wheel to see closer what the noise could be, Years ago I had a caliper come lose causing big noise..- adamkrz
- Post #2
- Forum: KJ General Discussion
-
A
PCV question?
It doesn't matter what oil you use I think, It's just that all the crap floats to the top, I changed out my pcv at 50k.- adamkrz
- Post #7
- Forum: KJ General Discussion
-
A
Jeep died...
I'm guessing fuel pump, They seem to die then come to life again only to fail a short time later..- adamkrz
- Post #10
- Forum: KJ General Discussion
-
A
Clutch Life?
Ditto what Tommud had said, I tow with mine and alot of stop and go w/50k on the odometer, I've always have problems with auto trannys but never with any of my manuals. My local dealer had many KJ's but only 2 had the 5 speed,I was lucky to get a black one..- adamkrz
- Post #6
- Forum: KJ General Discussion
-
A
kayak TIE DOWNS
I use the hinges for the hood ( both sides ) for the front and my trailer hitch for the rear,This is where the rack dealer recommended.- adamkrz
- Post #10
- Forum: KJ General Discussion
-
A
Weight Difference
Does anyone know what the weight of the stock KJ rims are -both the 16" and the 17". Just looking at the difference between my 17" stock wheels compared to the crager 16x8 steel soft *'s. Thanks Adam- adamkrz
- Thread
- Replies: 0
- Forum: Tires / Wheels
-
A
Howdy!
I would check it with a multimeter to make sure - I used the tan/striped one but tested it first. After all my work installing the brake controller - I ended up buying a pop up without electric brakes. We like all the same stuff - leaving for a backpacking trip this afternoon for 3 days...- adamkrz
- Post #3
- Forum: KJ General Discussion
-
A
Metal particles?
I had some also when I changed mine,looked like a sculpture on the plug,also what did you use for fluid in yours? I went with the amsoil syncromesh-shifts very nice..- adamkrz
- Post #6
- Forum: KJ General Discussion
-
A
Blowing #34 fuse
I found that when depressing the clutch it was rubbing on the trailer power wiring causing a short,strange because that wire is also fused and didn't pop.- adamkrz
- Post #3
- Forum: Electronics
-
A
Blowing #34 fuse
Driving down the road today I heard a pop and my radio shut off,After I got home found #34fuse open,I removed my radio and put in a new fuse- which pops as soon as I push it in,Also gone are my interior lights and door locks. I can't find any shorts to ground and wondering if it could be a...- adamkrz
- Thread
- Replies: 2
- Forum: Electronics
-
A
KJ and a manual transmission...
I own a 2004 with the 5 speed and I'm very pleased with it,My last 2 cars were both auto's with trans problems,This past weekend I towed a 2500 lb camper very smoothly.- adamkrz
- Post #4
- Forum: KJ General Discussion
-
A
Manual Transmission fluid change
Changed mine at 40K and it was pretty bad - Also had a fair amount of metal shavings on the magnetic drain plug.- adamkrz
- Post #7
- Forum: KJ General Discussion
