Search results

  1. C

    Factory service and parts manuals

    I could really use the 2004 service manual, I bought the Chilton book and doesn't have what I need. Thank you in advance.
  2. C

    04 liberty 3.7 blown head gasket, I'm looking for a little advice please, here is my story.

    I'm certain than none where bent! It happened after assembly but I don't know how. Thoughts?
  3. C

    04 liberty 3.7 blown head gasket, I'm looking for a little advice please, here is my story.

    Im fairly confident I have a bent valve stem. For it won't spin and the others will. I'm holding off removing the head until I do a leakdown test.this way I can hopefully discover other possible issues that need attention. Does that sound about right?
  4. C

    04 liberty 3.7 blown head gasket, I'm looking for a little advice please, here is my story.

    Thanks alot I'll find a leak down kit tomorrow, I have a compressor. So I'll give it a shot and see what happens. Cross your fingers for. Lol
  5. C

    04 liberty 3.7 blown head gasket, I'm looking for a little advice please, here is my story.

    I turned it over with a gauge in the spark plug hole. In the interim I have again taken it apart, valve cover and intake. The same rocker was off, and I know it's not the rocker due to I had swapped it with another and installed the new lifter before reassembly last time. It's not real easy...
  6. C

    04 liberty 3.7 blown head gasket, I'm looking for a little advice please, here is my story.

    Awesome, it looks like I'm going to hunt down a lash adjuster. Thanks alot for your input, and have a great day!!!!
  7. C

    04 liberty 3.7 blown head gasket, I'm looking for a little advice please, here is my story.

    Not sure what "cel" is? What I found is one of the rocker came off. The lifter looked good, It was stuck in the collapse position. So what I did was to put it back in position thinking that I must have made a mistake when installing, got it all put back together for it to run fir approx 10 sec...
  8. C

    04 liberty 3.7 blown head gasket, I'm looking for a little advice please, here is my story.

    Thank you for you input, i replaced all three timing chains, water pump all associated gaskets, head bolts, fuel injectors, coils, and spark plugs, no extra bolts or lost bolts, but i do recall thinking one of the rocker didnt look right. and I do have an endoscope to look into the cylinders...
  9. C

    04 liberty 3.7 blown head gasket, I'm looking for a little advice please, here is my story.

    That's good information, thank you for you input. Im hopeing that is my problem!
  10. C

    04 liberty 3.7 blown head gasket, I'm looking for a little advice please, here is my story.

    Do you know what kind of damage it could have caused?
  11. C

    04 liberty 3.7 blown head gasket, I'm looking for a little advice please, here is my story.

    My 04 jeep liberty with 100k miles had a blown head gasket, caused by a radiator blowing, and overheating causing a slight warp of the heads I replaced both head gaskets and had them machined before installing, I started it up and it ran good for 10 seconds, then I heard a metallic sound and it...
  12. C

    04 liberty 3.7 blown head gasket, I'm looking for a little advice please, here is my story.

    My 04 jeep liberty had a blown head gasket, replaced both head gaskets and had them machined before installing them, started it up and it ran good for 10 seconds, then I heard a metallic sound and it instantly shuddered, I turned it off at the same time. not sure what I should do, I'm thinking I...

Latest posts

Members online

Top