Search results

  1. R

    Coolant leak

    I have removed the carpet before and laid it out in my driveway, spray some simple green or laundry detergent and hit it with the power washer. I threw it up over my fence for a few days to let it dry out in the sun, both sides. It is a pain removing the seats and console but well worth it in...
  2. R

    Coolant leak

    What about taking it back to the shop and letting them do a warranty repair on their own work?
  3. R

    What part is this ?

    Front differential breather hose clamp. It usually hooks over top of a strut bolt.
  4. R

    What causes oil leaks? I live in Korea

    I have experienced the oil pressure sensor leaking, it is right behind and above the oil filter. Also the valve cover gaskets and grommets are notorious for drying out and cracking. Always start at the top when looking for oil leaks!
  5. R

    Odd wobble at highway speed only when accelerating

    I also experienced this and it ended up being the short 4x4 shaft. I ordered a kit on Ebay and rebuilt it myself!
  6. R

    Passenger Side Engine Valve(s) Alteration(s)

    LOL, it's not an alteration, it's a dropped valve seat. The engine must have overheated at some point, causing the aluminum head to expand. This causes the valve seats to drop out. You will definitely need to pull the head and take to a machine shop.
  7. R

    Timing Chain Tensioners etc ..

    Cloyes and Melling are the best, but I have purchased the kit from Ebay when money was scarce! I have done several in this manner and haven't had any issues. Mitzumo Auto and others. Example...
  8. R

    Loose hose 2006 3.7 engine

    It's usually over top of one of the strut bolts on my liberty's!
  9. R

    Failed 3.7 Engine Disassembly (2003) - Interesting Finds

    Sorry to hear about your bad luck. You can always get a junkyard engine and rebuild it. Be careful what year you get as the heads change a little bit. I have had luck finding Liberty's on Craigslist, Facebook, junkyards and even city or police auctions. Best of luck!
  10. R

    MLS vs Composite(Graphite) Gaskets and other backyard rebuild questions.

    I have used both methods but like the graphite gaskets best. DO NOT USE COPPER COAT with graphite! I made that mistake too and had oil leaks from the heads. The copper coat does not mesh with the graphite. I also recommend having the heads worked at a machine shop just to be sure they are even...
  11. R

    Failed 3.7 Engine Disassembly (2003) - Interesting Finds

    In my past experiences, the water usually leaks in when you pull the head anyway. Be sure to check the heads over very closely. I have seen little chunks come off the lifter casing or even the valve keepers when it drops a valve. Check the cylinder walls as well to ensure a chuck didn't bust off...
  12. R

    Cooling fan issue

    It's also possible the fan is bad? Have you tried direct power to it? Happened to me before on a trip as well.
  13. R

    liberty window regulator

    Replacements are available on Ebay, but make sure you order the specific door. They are easy to replace but sometimes don't last too long!
  14. R

    Coolant hose

    Ebay or Amazon should have them...
  15. R

    Jeep Liberty Overheat issue

    After refilling with antifreeze, did you open the bleeder to get all the air out of the system? Also have you checked the water pump and radiator fan?
  16. R

    Immobilizer SKIM Pin code

    Hi, I just tried this and my email came back saying it was blocked for some reason. Maybe because it's Sunday night and they are not open?
  17. R

    05 Liberty P0430 and No Bus

    p.s. How do I check for power and ground, especially with the under dash modules?
  18. R

    05 Liberty P0430 and No Bus

    LOL, that was my first step! My mechanic friend found an open circuit at the ODB underdash connector, but I'm not sure how to trace it out.
  19. R

    05 Liberty P0430 and No Bus

    I have seen a lot of No Bus discussion on this site but nothing that seems to help me figure this one out! I have changed the catalytic converter and went thru several 02 sensors on bank 2 sensor 2. The light stays off for a while, but comes back on with the same code. I finally tried a Snap-on...
  20. R

    Can someone help me identify these lines?

    Transmission Lines! You can disconnect and replace with higher pressure rubber hose lines. Be sure to secure them so they don't rub against anything.

Random media

P1000622
finished2
Out with the old
1733.jpg
Lift parts !
3246.jpg
hankook
IMG_20190921_144221
frontback2

Latest posts

Members online

Total: 266 (members: 3, guests: 263)
Top