Search results
-
What is this hose - 34611-B - going into the airbox?
For anyone looking for genuine replacement, I was able to get both tubings via my local Chrysler dealer: - https://store.mopar.ca/oem-parts/mopar-cylinder-head-to-air-cleaner-hose-53013723ac - https://store.mopar.ca/oem-parts/mopar-crankcase-vent-to-intake-manifold-tube-53031133ae Part numbers...- david.lukac
- Post #9
- Forum: KJ General Discussion
-
Coil 6 Insufficient Ionization, Multiple Cylinder Misfire, Fuel Injector 4 Circut/Open
In my case (Coil 4) Low Ionization was caused by fault ECM/PCM - replaced with refurbished one from Flashmasters - after ruling out spark plugs, ignition coils, injectors and wiring continuity...- david.lukac
- Post #23
- Forum: KJ General Discussion
-
hub bearing bolt size?
So, the bolt from Amazon (https://www.amazon.ca/dp/B0D2BKXCD7) worked without any issues. There’s plenty of space for the socket, at least when installing with steering knuckle out, and I don’t see any issue with extra 2mm of length. (I replaced only one bolt that had stripped head for now.)...- david.lukac
- Post #4
- Forum: KJ General Discussion
-
hub bearing bolt size?
For anyone replacing the bolts - this is the original bolt: - https://www.idparts.com/knuckle-bearing-bolt-liberty-crd-06503088-p-10027.html - https://www.summitracing.com/parts/mop-06503088 -...- david.lukac
- Post #3
- Forum: KJ General Discussion
-
2004 Jeep Liberty not getting ignition coil signal from PCM
I had the same issue - Cyl4 missfire, codes P0304 and P2311. I changed spark plugs and ignition coils, plug was wet from the gas to injector seemed to be OK, there was continuity on wiring between the ECM and the coil. After some research and reading terrible reviews about bunch of vendors...- david.lukac
- Post #9
- Forum: KJ General Discussion
-
What is this hose - 34611-B - going into the airbox?
Thanks @Hermics ! I was thinking the same. The original T-shaped tubing looks so brittle and easy to break, I'd worry every time I go in there. The PCV valve tubing seems to be from the same material.- david.lukac
- Post #8
- Forum: KJ General Discussion
-
What is this hose - 34611-B - going into the airbox?
Thanks @JeepJeepster ! I found the sponge bob as well, falling apart, in desperate need for replacement . Googling around, it’s discontinued, any tips for replacement? Also I managed to break off the vent tube from t-junction to airbox when replacing PCV valve, so crankcase vent is no more...- david.lukac
- Post #3
- Forum: KJ General Discussion
-
What is this hose - 34611-B - going into the airbox?
Hi guys, what's the purpose of the hose going into the airbox - see image? It has 34611-B written on it. Is it a breather vent? From? It's not on Haynes Repair Manual's engine bay image :oops:. UPDATE: Found this: Cylinder Head To Air Cleaner Hose - Mopar (53013723AC) ... seems like might be...- david.lukac
- Thread
- airbox breather engine bay hose question
- Replies: 8
- Forum: KJ General Discussion
