Search results

  1. 4

    Alignment Specifications for a Lifted KJ

    Looks like we have an alignment expert here........
  2. 4

    What did you do to your jeep today?

    Quite a bit. My wifes takes about a gallon from when its dead empty. Fill it up until its overflowing
  3. 4

    What did you do to your jeep today?

    Helped a fellow Jeeper install custom long ams
  4. 4

    Alignment Specifications for a Lifted KJ

    They obviously dont know what they are doing.........tell them to set the camber and toe and let the caster fall where it lands. The first one actually had the right side looking good. He was on it, just needed some help. I made a deal with a shop. Told him I would be happy to pay a 20 tip if...
  5. 4

    Alignment Specifications for a Lifted KJ

    Mine is all within spec with factory specs.....except for the Caster. But im not too worried about that
  6. 4

    Going to be putting a 2" lift and 245/75/r16 on my liberty.

    Mine looks just like that, but I drilled a hole for the zert. Works great.
  7. 4

    Skid Plate recommendation

    Skid Row or 4xguard. I have wheeled real hard. I have a nice dent in my Skid Row, mopar skids would of gave under the pressure
  8. 4

    Questions about 2WD Liberty

    Yep same 19" on the KJ
  9. 4

    Ball joint recall with lift?

    Id say spend the $70 and get the Moogs installed. Easy to do, and 100x better than mopar
  10. 4

    How do I make my jeep look like this?

    Listen to Tom, 4.88s, and I have been working on my 5" lift for over 6 months, had a few "prototypes" and improved on the design after it was taken on a trip to Colorado. Its not easy or cheap, heck, just the bolts alone were $92.16, just the bolts. And most likely, im gonna make 3 for the...
  11. 4

    Cracked Front Diff...

    Custom JKd30 fitted as a IFS for the KK. Thats what I would do
  12. 4

    How do I make my jeep look like this?

    Im at 4.25" lift and could easily run (and have test ran) 33" tires. BUT 33" tires require 4.88s, steel front diff, alot of work for 33s to fit on a 4.25" lift. But I also run 2" bumpstops in the rear with my 32.2" tires. So I have done some work back there to make them tuck nicely...
  13. 4

    spark plugs (not what you think)

    Nah.....try changing the plugs in a 65 mustang, but with a FE 427. Gotta un bolt the motor, take off the hood, and lift the engine out of the bay to get to them.
  14. 4

    Ironman gasser lift full details

    1. Usally around 2.25" lift I have seen personally. Just to throw a curve ball, my wifes Ironman is at 4.25". But were not at that stage for you yet...... 2. Yes ALL lifts for the KJ i recommend bumpstops, teraflex in the front. Hockey pucks in the rear. 3. JBA now sends the longer shocks for...
  15. 4

    Need different rims

    Too small, plasma cutter!!! Just kidding
  16. 4

    Window Regulator Question

    Look up "autoandart" they have the metal plate to fix it and its under 40 bucks. I have three, perfect fit
  17. 4

    BDS Lift Kit

    125k on the factory crappy shocks and springs, change them out with OME or the likes
  18. 4

    02 Liberty V8 Swap

    Well for one thing, the 4.0 will not fit. Just too long.
  19. 4

    Air Conditioner Drain Tube

    There is no 2013 Jeep liberty so your AC drain tube dosent exist
  20. 4

    Distilled water only in radiator

    Heres a water pump that has been using regular bottle water and prestone universal coolant for over 100k miles.....no damage to the impeller, never leaked, engine never got hot. After almost 190k miles on the water pump, the bearing started to get loose........YMMV Passageways were a little...

Random media

IMG_0001
cwash2
3380.jpg
new jeep
Yankee Hill Trail Colorado
High beam
100 3446
Daytona Beach, Fl#2 Nov 2008
LOST avatar

Latest posts

Members online

Total: 402 (members: 6, guests: 396)
Top