Changed out both upstream oxygen sensors with ntk's after install was smoking out exhaust white and damp for awhile smelt like normal exhaust is this normal? after changing them out there was alot of water dripping out the tailpipe as well but seems my multiple misfire rough idle has disapeared
Remove the plastic push rivets on the front of the inner fender and reach inside theres a metal clip on the bottom of the light once off you can pop it out
Did my rear shocks and coil springs used a 4 way had them torqued to proper specs at the tire shop after then two weeks later did the rear brakes my brother borrowed the 4 way so used the stock iron and yes it bent even under stock torque spec lugs
I will double check the coils to make sure as for plugs ngk copper cores were put in a month ago gapped at .40 did have the misfire at lower rpms but cleaning the throttle body out as well as the iac smoothed low revs and idle right out
So i have all plugs changed throttle body and iac cleaned but im getting a misfire (p0300) like its hitting a rev limiter between 3500 and 4000 rpm also noticed when shifting (6cyl 6spd) rpm sometimes wont drop right away when throttle is released and clutch is depressed to shift any ideas? Did...
Check with chrysler using your vin when i purchased my 05 i looked at a few other libertys and ran the vin's through a recall website two had the hitch installed along with the ball joints and control arms but the hitch wasnt on them anymore
So i ended up getting a p0302 code this week coil on cylinder 2 was weak and replaced it 3 days later it returned followed by p0016 can a bad crank sensor cause a single cylinder misfire? Plugs are good as is compression
I believe the chassis would be identical perhaps with different coil spring specs? Like spring rate. But otherwise Id say if its what you want get it 4cyl or not i love my six speed in my renegade but i have the 3.7L
Replaced the plugs with autolite copper cores picked up a filter and oil for a change later this week oh and had a p0302 code turns out the previous owner changed the plugs lost the plug socket o-ring on the plug and just put the coil on cleared code after plug replacement now no code
Since i purchased my 05 renegade i get gurgling from the coolant overflow tank and a kind of rushing of water sound now and then i dont see any loss of coolant except maybe an 1/8" in 3 months i do know the thermostat was changed as well as the upper rad hose before i bought it. There is no...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.