Search results

  1. DadOSix

    Need help ASAP

    Let’s back up and learn why you did a relearn in the first place…. You have so many threads going it is hard to follow. It was a decent idea to put a shot of starting fluid in the intake. You have proved at this point exactly 1 thing - no spark - but why? With the TPS code, I doubt the ECU...
  2. DadOSix

    How To: Change front driveshaft / change a driveshaft head

    If that boot is ripped up, the joint is bad. Usually, it is the tc end and not the front one, but when I do mine, both get changed. I am sure you found this already, but the ends are available separately from Driveshaftparts.com. I have a spare set in my parts bin. Did the 04 twice and the...
  3. DadOSix

    How To: Change front driveshaft / change a driveshaft head

    Those suffixes. Aa ab ac. If the main part number matches you are good to go. The 'a' suffixes are minor updates.
  4. DadOSix

    2016 Liberty Radio Replacement

    sweet! That does not look to bad to do at all!
  5. DadOSix

    Help plz

    Hopefully, it is plug and play at this point after swapping the 07 intake off for the 05. 1 - grounds 2 - harness connections - big plug, route the harness over the engine correctly. There will be connectors for crank position that runs over top and down the right side of the engine and back...
  6. DadOSix

    Help plz

    Not necesssary, but appreciated! I read and write some technical stuff from time to time and we need to understand exactly where and what happened.
  7. DadOSix

    Help plz

    Clarify please : In your original post, you talk about the 07 engine, transmission and transfer case. And bolting it together and stabbing it back in. Don;t take this badly, but with no punctuation, I can read that 2 ways. I am *hoping* you mean that you dropped it all from the 07, but used...
  8. DadOSix

    Help plz

    - i dont know if the manifold is the same 05 and 07. With the ‘drive by wire’ 07 throttle body, you may need additional work inside the jeep to swap out the accelerator pedal. Wiring most likely not present in the 05. I like your idea to keep the cable setup for the 05. Maybe just the...
  9. DadOSix

    Help plz

    Sounds like a good plan.
  10. DadOSix

    Help plz

    You stated you want to use the 05 harness. I have no idea if there are differences in the sensors between those 2 years. I suggested swapping them - for me, i would - as I ‘knew’ my sensors were good. The donor engine, you have no idea unless you heard the engine run before buying it. Try it...
  11. DadOSix

    First Daily Start-up: What the Heck?

    You are welcome! Final thought on the adapter - If you are near to a junkyard that has some kj or kk jeeps, pull a rail and the associated line from back near the brake booster. You now have what you need to fabricate your own adapter with a few bits of compression / flare fittings. Hope...
  12. DadOSix

    Help plz

    You should be gold - 05 and up use the same lower end stuff - early issues with reluctor wheel on the crank and various sensors. Make sure to swap your sensors from the 05 engine to the 07. Since you want to eliminate the 07 intake and drive by wire, you do not want to swap the ecu. Think of...
  13. DadOSix

    2016 Liberty Radio Replacement

    That there is sweet! Did you have to carve up anything behind the head unit to fit it in there?
  14. DadOSix

    First Daily Start-up: What the Heck?

    https://tillmantools.com/products/mopar-tools-6539a-5-16-fuel-pressure-test-adapter?srsltid=AfmBOoqaECnC_0_pUizMBx1cYlCjWagpBcseXUCRa0JF13fUzXL_6dWg See this gizmo? Imagine the line and black fitting separated. This is the thing that you insert at the fuel feed to the rail, and can then...
  15. DadOSix

    First Daily Start-up: What the Heck?

    Alright then — Next best idea - we need to get a look at the tester kit and see that it has an adapter that will fit in the fuel line - So i’d be disconnecting that fuel feed line that comes up by the brake booster and fitting the adapter there. So we are bypassing the rail and reading the...
  16. DadOSix

    First Daily Start-up: What the Heck?

    Hmm. Without a kK to see, you got me stumped. The line usually runs up the driver side firewall and has a connection like a transmission line. Then the rail runs up the left side of the engine, and has ports for 3 injectors, makes a 90 degree turn to the right and crosses the intake. Then...
  17. DadOSix

    First Daily Start-up: What the Heck?

    It should be right below that fitting on the ac hose that you show in your picture. It can be anywhere on that rail. Watch the above video for where it should be located and test procedure
  18. DadOSix

    First Daily Start-up: What the Heck?

    AZ should have a loaner tool https://www.autozone.com/test-scan-and-specialty-tools/fuel-pressure-tester/p/innova-fuel-injection-pressure-tester/273356_0_0?searchText=fuel+pressure+tester Seems as now, you buy the tool, use it and have 90 days to return it. I guess that makes sense rather...
  19. DadOSix

    Harmonic balancer installer for 2003 2.4L

    Excellent! Thanks for figuring it out!.
  20. DadOSix

    Speedometer just stopped

    Check your rear wheel speed sensor - broken wire or damaged sensor.

Random media

4969.jpg
all lit up
tail lights smoked
Trailer4
One of my favorite beaches on the far north west side of St. Thomas.
heep
Before lift
325.jpg
Wife out having fun.

Latest posts

Members online

Total: 350 (members: 3, guests: 347)
Top