2.8 CRD transmission problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BlueBox

New Member
Joined
Apr 11, 2023
Messages
2
Reaction score
0
Hi everybody.
I had issues with automatic transmission, sometimes jerks on shifting, late shifting, blowing dipstick out, etc. Former owner said that he did transmission service and fluid on dipstick was obviously new. I decided to do service again and I found out that filters inside are new, but in sump filter there was no dirt at all. I opened small filter with angle grinder and it was also new inside...... I also cleaned breather hose.

After service it started to work perfect, shifted like never before. It worked for around 600 miles. But few days ago it started again to blow dipstick out and to have some jerks and shifts later.
Diagnostics shows temperature sensor intermittent.
It seems like fluid doesn't have free flow trough whole system?
Did anyone had similar issue?
 

KJowner

Full Access Member
Joined
Oct 20, 2022
Messages
1,426
Reaction score
812
Location
Uk
With the engine running and the car in neutral pull the dip stick out and look at the level, also what does the fluid look like? Pink, brown, bubbles, milky etc.
 

trailpack

New Member
Joined
Aug 30, 2024
Messages
10
Reaction score
2
What year is your 2.8 CRD? Wondering if this is a common issue for certain model years?
 

CTJEEP

Member
Joined
Feb 14, 2021
Messages
30
Reaction score
16
It sounds more like valves and pump issues.... Unfortunately, it's all electric control....

Have you scanned the computer?

Any chance your in New England?
 

BlueBox

New Member
Joined
Apr 11, 2023
Messages
2
Reaction score
0
It sounds more like valves and pump issues.... Unfortunately, it's all electric control....

Have you scanned the computer?

Any chance your in New England?
No, I am in Europe.
So far I found out that there was not enough fluid in transmission, I toped it, reset computer and it is working fine. We will see......
 
Top