wv05jeepkj
New Member
- Joined
- Feb 12, 2021
- Messages
- 2
- Reaction score
- 2
I have a 2005 3.7L v6 Jeep Liberty Limited with two issues.
When I go to start my Jeep, it will sometimes start then sometimes not. It always starts in the morning but randomly won't throughout the day. When it doesn't start, it won't even crank or attempt to turn over. All my lights and everything still turn on, my battery is brand new. I have searched around for similar issues and it does not appear to be the steering column actuator pin as I installed a push start button on my 12v wire and starter wire and when I turn the key to ignition 1 and 2 and hit that it will start in the morning but still not usually otherwise except for several hours. Sometimes playing with my gear shifter helps remedy this.
Second issue, my left front turn signal does not work. When I lock the car, all the bulbs flash and work fine. However when I turn left or just have my parking lights on, the left turn signal is non functioning. Is this possibly the hazard switch or a fuse or relay? Is there anyway I can diagnose these problems individually?
Thanks!
Mike
When I go to start my Jeep, it will sometimes start then sometimes not. It always starts in the morning but randomly won't throughout the day. When it doesn't start, it won't even crank or attempt to turn over. All my lights and everything still turn on, my battery is brand new. I have searched around for similar issues and it does not appear to be the steering column actuator pin as I installed a push start button on my 12v wire and starter wire and when I turn the key to ignition 1 and 2 and hit that it will start in the morning but still not usually otherwise except for several hours. Sometimes playing with my gear shifter helps remedy this.
Second issue, my left front turn signal does not work. When I lock the car, all the bulbs flash and work fine. However when I turn left or just have my parking lights on, the left turn signal is non functioning. Is this possibly the hazard switch or a fuse or relay? Is there anyway I can diagnose these problems individually?
Thanks!
Mike