2006 Jeep Liberty 3.7

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Brawkzlit

New Member
Joined
Feb 28, 2020
Messages
28
Reaction score
4
Hey guys really searching for some help, the other day I started my KJ, and it had this loud ticking noise when I was to accelerate it was get faster. Anyway I changed oil and added lucus oil to too make it thicker, well there is still a tick and Just lookin gun for some advice, I’m pretty mechanically inclines so just looking for some help.
 

LibertyTC

Well-Known Member
Staff member
Moderator
Joined
Oct 24, 2008
Messages
9,185
Reaction score
1,831
Location
B.C. Canada
Welcome.
Sounds like an engine ticking noise, valve train tick .??
A mechanical stethoscope may help to pinpoint left or right side etc.
May have to pull valve cover (s)
to inspect rockers, or one loose ?
You could pull the accessory serpentine belt for a few moments, to eliminate accessory noises.
 

Brawkzlit

New Member
Joined
Feb 28, 2020
Messages
28
Reaction score
4
Yeah I also used at stethoscope, and found out it’s on the passenger side, only 128000 on it. I checked to see if it was an exhaust leak but puttin In the new oil kinda proved that. If I pull the vale cover off how would I be able pinpoint what’s bad
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,649
Location
Southeastern Ohio
Making oil thicker will not help and many times make it worse
If you pull the cover you should be able to tell if a rocker is loose or getting ready to fall off
 

Brawkzlit

New Member
Joined
Feb 28, 2020
Messages
28
Reaction score
4
Oops lol. Being that they’re hydraulic lifter I thought maybe if the was a weak lift it would keep it from Ticken like it was. Alright I’ll give it a look here a let you know what’s up, Bronson gym my fingers it’s not a crank bearing or something down there lol
 

jeeper03

Full Access Member
Joined
Sep 27, 2015
Messages
129
Reaction score
31
Location
warrenton Va
I would change all the lifters in it. Honestly not that bad of a job if you have the tools and I’ve seen to many fail right around 100k. Don’t end up like this guy, just put a new engine in his at work last week.
 

Attachments

  • FB51A657-6EAF-4151-983D-D04A0416F580.jpeg
    FB51A657-6EAF-4151-983D-D04A0416F580.jpeg
    118.8 KB · Views: 16
  • E739ECB9-03B5-4D83-BD3E-1D9D5F011FE9.jpeg
    E739ECB9-03B5-4D83-BD3E-1D9D5F011FE9.jpeg
    125.1 KB · Views: 17

Brawkzlit

New Member
Joined
Feb 28, 2020
Messages
28
Reaction score
4
Yeah I’m going to see, and replace the gaskets and stuff. It kinda stops ticking when she get warmed up. Thanks for the advice guys!
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,649
Location
Southeastern Ohio
Have a customers 05 that has a slight tick in it till it warms up. At 25-30 degrees it does it for about 5 minutes or less
He is of the type if its still running don't touch it LOL
Love to get in there now and replace rockers/lifters esp since I have a set sitting in the shop
 

Shane Giggie

Member
Joined
Nov 26, 2019
Messages
92
Reaction score
16
Yeah I’m going to see, and replace the gaskets and stuff. It kinda stops ticking when she get warmed up. Thanks for the advice guys!
My 06 ticks a little too until it gets warmed up then its perfect. Mine has 240,000kms not sure what that is in miles.
 

ltd02

Comfortably numb
KJ Supporting Member
Joined
Aug 15, 2014
Messages
2,715
Reaction score
245
Location
North Central Maryland
Yeah, that's about 150k. That's about when I had a few weak ones in my 02. Actually had the #2 exhaust fall of twice. The second time I replaced several of the lifter/lash adjuster on that side and no more problems.
 

Brawkzlit

New Member
Joined
Feb 28, 2020
Messages
28
Reaction score
4
The next day it had a loud tick, changed oil tick gone when warms up. I’m having someone diagnose it Monday, then I’m going to fix it
 

Brawkzlit

New Member
Joined
Feb 28, 2020
Messages
28
Reaction score
4
I just wanna make sure Ik what it is before I tear it apart, if it’s like a cam bearing then I’m goin to probably have to get some stuff Cause I don’t have cherry pick or engine stand
 
Top