3.7 2006 coil dropping out?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

danabryant1979

New Member
Joined
Dec 6, 2024
Messages
4
Reaction score
0
Got a 2006 3.7 i replaced the heads on and now i get coil 6 that seems to drop outat random times. I moved the coil and plug but the issue stays at cylinder 6. Any ideas?

Engine does have a mysterious hesitation now as well.
 

Attachments

  • f915aeffbabf92900fd98d1123626eda.png
    f915aeffbabf92900fd98d1123626eda.png
    65.1 KB · Views: 2

DadOSix

Full Access Member
Joined
May 20, 2020
Messages
856
Reaction score
494
Location
Cumberland, MD.
Wiring, internal damage, bad lifter (lash adjuster) Bad rocker. Based on your trace, I am going with wiring.

These things are older than dirt and the wiring is always suspect IMO. Those little connectors on the coil is where I would start. There is a thing called a ‘noid’ lamp that plugs into the harness and blinks. No blink, bad wire or connector. Note - the bad end may be at the coil, or trace back to the next connector.
 

danabryant1979

New Member
Joined
Dec 6, 2024
Messages
4
Reaction score
0
Wiring, internal damage, bad lifter (lash adjuster) Bad rocker. Based on your trace, I am going with wiring.

These things are older than dirt and the wiring is always suspect IMO. Those little connectors on the coil is where I would start. There is a thing called a ‘noid’ lamp that plugs into the harness and blinks. No blink, bad wire or connector. Note - the bad end may be at the coil, or trace back to the next connector.
Thank you for the info. Do you perhaps know where I can find a wiring diagram for the coils?
 

Latest posts

Members online

Top