Another front and rear bumper for KJ's...

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

LibertyTC

Well-Known Member
Staff member
Moderator
Joined
Oct 24, 2008
Messages
9,191
Reaction score
1,836
Location
B.C. Canada
I would like to see the mounting instructions.
Also 3/16 steel....not an Arb by far.
The price is very good at $500 though.
 

JeepinJarhead03

Full Access Member
Joined
Sep 17, 2009
Messages
387
Reaction score
16
Location
Petersburg VA
arb says their skins are 3mm which is 0.12" 3/16ths is 0.1875"

guess that actually explains something for me

had always wondered why my bumper was so much heavier than an arb

guess that could be a reason

not at all saying that bumper in the pic is built as well as an arb, dont get me wrong, it certainly isn't crafted as well
 

tjkj2002

Full Access Member
Joined
Dec 17, 2006
Messages
10,612
Reaction score
41
Location
Somewhere between being sane and insane!
arb says their skins are 3mm which is 0.12" 3/16ths is 0.1875"

guess that actually explains something for me

had always wondered why my bumper was so much heavier than an arb

guess that could be a reason

not at all saying that bumper in the pic is built as well as an arb, dont get me wrong, it certainly isn't crafted as well
The ARB is made out of higher strength steel so it can be thinner with the same strength as regular sheet steel at 3/16" or thicker but a whole lot lighter but the cost goes up also.
 

iamweasel

Full Access Member
Joined
Sep 6, 2010
Messages
260
Reaction score
0
Location
Joburg, South Africa
Why would they make the MultiCarrier open to the right, when the tailgate opens to the left? Seems like a stupid flaw to me...
 

tjkj2002

Full Access Member
Joined
Dec 17, 2006
Messages
10,612
Reaction score
41
Location
Somewhere between being sane and insane!

jeepfrog

New Member
Joined
Feb 12, 2007
Messages
485
Reaction score
0
Location
Northern IL
If you do a web search on the new company name, it seems that there are still issues (according to some other 4x4 forums) with the customer service side of the business.
 

Ry' N Jen

Banned
Joined
Dec 26, 2006
Messages
9,242
Reaction score
13
Location
Slightly North of the 49° th. Parallel... In HongC
You must be registered for see images


I think I just threw up in my mouth. :doublepuke:

A kj with an under bite! :happy175:

All you'd have to do is let the air out of the tires and you have a snow plow!
Hell, you put a winch on that thing and you'd have to run diesel coils up front!
Approach angle... What's that!


I can tell I was heavily medicated when I posted that!
Definitely blinded by the side effects.:doublepuke:
Now I wish I never posted this...
 
Last edited:

first&lastKJ

Full Access Member
Joined
Oct 23, 2010
Messages
1,214
Reaction score
127
Location
Indiana
Not very attractive at all. Price is'nt bad, but you get what you pay for. I personally like the stock front bumper on the 02-04 better than any aftermarket bumpers out there. We are thinking about a Detours KJ backbone bumper to mount a winch to on our 02. It would be more for the look since we have only been off road twice.
 
Top