Best way to run Amp wire?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

hallowhead

New Member
Joined
Apr 20, 2015
Messages
1
Reaction score
0
Location
New Jersey
Hello,

I just purchased an entire speaker system for my car and plan to install the AMP in the cargo bay in the trunk and I am wondering what's the best way to get the wire from the engine area into the cab?

Thanks in advance

Cheers
 

Snail Farmer

Full Access Member
Joined
Mar 10, 2012
Messages
939
Reaction score
1
Location
Fairmont, MN
Pull back the carpet in the driver's seat foot well. On the side closest to the door you'll see a weld seam. Follow that seam up toward the firewall and you'll see an oblong plug. It might be partially covered with a black sealant. Push a screwdriver through the plug and pop it out.
 

LiberTodd

Full Access Member
Joined
May 8, 2015
Messages
72
Reaction score
0
Location
IL
Pull back the carpet in the driver's seat foot well. On the side closest to the door you'll see a weld seam. Follow that seam up toward the firewall and you'll see an oblong plug. It might be partially covered with a black sealant. Push a screwdriver through the plug and pop it out.

Will try this.
 

Kriszilla

Full Access Member
Joined
Apr 3, 2007
Messages
24
Reaction score
0
Location
Johnson City, TN
I know this is late to the party, but make sure you replace that plug with a rubber grommet so that the bare metal won't work its way through the insulation on your power wire over time.
 

Latest posts

Members online

Top