Busted my DS Rear Tail Light... What's the difference between these two?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Akedos

Full Access Member
Joined
Mar 13, 2009
Messages
233
Reaction score
0
Location
Elmira, NY

KeswickDave

Gold Moderator
KJ Supporting Member
Joined
Nov 28, 2006
Messages
1,915
Reaction score
2
Location
Queensville, Ontario
I don't see a difference between those, the only difference I'm aware of is between 02-04 and 05-07.

You might want to ask around here and/or on LOST as well, as some have swapped theirs out for aftermarket ones (smoked, LED, etc).

I replaced mine from someone on the forums.

Dave
 

Jacob789456

Full Access Member
Joined
Nov 27, 2010
Messages
53
Reaction score
0
Location
San Diego, CA
Either one will work. I bought the one from the first link (depo lights) about 3 weeks ago and it matched up fine and matches the other light perfectly. I also got it in 2 business days in So Cal.
 

hyde

Moderator
KJ Supporting Member
Joined
Feb 15, 2006
Messages
7,347
Reaction score
7
Most of these are chinese replicas (Best Deals Replacement, New Aftermarket, NIB OEM Compliant, etc.. brands). Not OEM stuff. No big deal other than some light condensation.
I also posted around here recently, avoid the clear tails, or the ones that come with pigtails that connect to factory harness "Externally". Stock tails have the socket built into the housing, the aftermarket "euro" or "clear" or "altezza" ones come with pigtail. They corrode beyond recognition and render your factory harness useless. Eventually you end up having to cut it and wire them directly onto jeep, at that point, you cannot go back to stock taillights, unless you replace the harness/connector on the jeep side.

I would say go with replicas, if possible ask them to send you a picture of the connector to see how it is wired. But avoid clear/alteazza/euro

Oh when checking yards, look for 02-04 because 05-07 have different connector.
 
Last edited:

Akedos

Full Access Member
Joined
Mar 13, 2009
Messages
233
Reaction score
0
Location
Elmira, NY
Most of these are chinese replicas (Best Deals Replacement, New Aftermarket, NIB OEM Compliant, etc.. brands). Not OEM stuff. No big deal other than some light condensation.
I also posted around here recently, avoid the clear tails, or the ones that come with pigtails that connect to factory harness "Externally". Stock tails have the socket built into the housing, the aftermarket "euro" or "clear" or "altezza" ones come with pigtail. They corrode beyond recognition and render your factory harness useless. Eventually you end up having to cut it and wire them directly onto jeep, at that point, you cannot go back to stock taillights, unless you replace the harness/connector on the jeep side.

I would say go with replicas, if possible ask them to send you a picture of the connector to see how it is wired. But avoid clear/alteazza/euro

Oh when checking yards, look for 02-04 because 05-07 have different connector.

Thanks for the info. Checking out used ones now instead of reproductions, I'll be more comfortable knowing I won't have to rewire stuff.
 

hyde

Moderator
KJ Supporting Member
Joined
Feb 15, 2006
Messages
7,347
Reaction score
7
Try to get a picture of the replica ones. If they have the connector right on the housing, you should be fine.
 

Akedos

Full Access Member
Joined
Mar 13, 2009
Messages
233
Reaction score
0
Location
Elmira, NY
Try to get a picture of the replica ones. If they have the connector right on the housing, you should be fine.

Just won a bid on one from an 03 for $40... good enough for me. Cheaper than most that I found.
 
Top