Component Install

[DJ Ebster]

Hi
I have a Pioneer aftermarket HU and some Infinity Reference 6 1/2" in my doors. The door speakers are powered via the head unit - not a amp.
I also have a 12" Infinity sub powered by an Infinity mono amp.

I am thinking of getting some components for the front and have the following questions:

1) Can I install the components without a amp to power them? I don't really want another amp in my car if I don't need one.
2) I will attempt the install myself and wanted to know what's the best way to run the wires from the crossover unit (which I will probably mount inside the door) to the tweeter location? Do I have to run it thru the rubber door boot and how do I do this?


If anyone has advice or pictures please share them.

Thanks
E

 

[Zelroth]

1) As long as the components are rated at the same power rating as your HU output they should work fine. (normally 50Wx4)
2) I would run the wires through the rubber boot otherwise the door might cause damage to the wiring.

 

[jinstall]

Be advised Infinity is known to require power to make them work, b0th home and mobile speaker systems. I haev been using their stuff for close to 20 years and they have always LOVED power.