Driving without rear driveshaft?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

E from Chicago

New Member
Joined
Sep 10, 2019
Messages
1
Reaction score
0
We are going to be dolly towing our 2003 KJ behind our motorhome next week, and planning to remove the rear driveshaft at the pumpkin (can't afford to equip it for flat towing yet, unfortunately).

Question specific to the KJ... can I pull the driveshaft entirely and drive as a front wheel drive? I know some model Jeeps can, but the Internet seems to be silent on KJ's...

I've got a Limited with the V6 and 42RLE, NP231.
 
Last edited:

JasonJ

Full Access Member
Joined
Jul 8, 2013
Messages
1,521
Reaction score
53
Location
Michigan
Not sure... probably, theoretically..

if it were me, being a risk taker, I'd try it out in my driveway and see what happens.
 

jeeptorino68

Full Access Member
Joined
Nov 28, 2011
Messages
931
Reaction score
81
Location
Oregon
Yes...but it will behave differnet than you expect since it is....front wheel drive...
 

mrlavalamp

Full Access Member
Joined
Jul 12, 2017
Messages
205
Reaction score
53
Location
Sin City
I drove my 2006 without the rear shaft for a few weeks.

No problems, but I was easy on it not being sure.
 

LibertyTC

Well-Known Member
Staff member
Moderator
Joined
Oct 24, 2008
Messages
9,185
Reaction score
1,832
Location
B.C. Canada
Make sure you mark the driveshaft correctly before removal.
With a command track it may bind easily in turns.
You may want to consult the dealer, before hand.
 

sota

Full Access Member
Joined
Apr 6, 2011
Messages
2,397
Reaction score
1,251
Location
NJ
I thought towing with the t-case in neutral was the preferred/acceptable method?
IIRC the t-case pump is driven off the rear output shaft, so it being spun while towing is a good thing.
 

lfhoward

Wheel. Repair. Repeat.
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,430
Reaction score
2,681
Location
Philadelphia, PA
^^^ This.

The Liberty is designed to be flat towed with the transmission in park and the transfer case in neutral. No driveshaft removal needed. Check your owners manual for the correct steps involved.
 

LibertyTC

Well-Known Member
Staff member
Moderator
Joined
Oct 24, 2008
Messages
9,185
Reaction score
1,832
Location
B.C. Canada
I thought towing with the t-case in neutral was the preferred/acceptable method?
IIRC the t-case pump is driven off the rear output shaft, so it being spun while towing is a good thing.
His front wheels be off the ground.,on the dolly.
 

sota

Full Access Member
Joined
Apr 6, 2011
Messages
2,397
Reaction score
1,251
Location
NJ
being on a dolly or a toad won't make a difference. it's one of the reasons liberty's were common for RV'ers to buy.
 

Birdman330

Full Access Member
Joined
Dec 8, 2013
Messages
667
Reaction score
15
Location
Des Moines, Iowa
If overheating is a major concern, depending on the RV there are cooling kits available that you hook up from your RV to your towing vehicle I have seen them in person they are quite nice. These kits allow the transmission to be cooled while being towed flat or on a dolly.
 
Top