Exhaust replacement
- Thread starter Lib88888
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
derekj
Full Access Member
I put a Dynomax Super Turbo kit on my truck - gives it a nice little burble under 1500 rpm but once you are up to speed it is pretty quiet - no droning on the highway at all.
You must be registered for see images attach
Luke
Interloper
I ran a Thrush welded muffler on the KJ for several years until it rusted out. Now onto a rockauto stainless thru-flow type.
No jobber tailpipe I jave found is as good as the original so far as good diameter and not rusting away quickly. I used up the first one, and now onto another used one. The section of pipe from the cat flange to the muffler is easy to renew so long as you can weld.
No jobber tailpipe I jave found is as good as the original so far as good diameter and not rusting away quickly. I used up the first one, and now onto another used one. The section of pipe from the cat flange to the muffler is easy to renew so long as you can weld.
Similar threads
