Factory Build Sheet

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

lfhoward

Wheel. Repair. Repeat.
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,449
Reaction score
2,710
Location
Philadelphia, PA
Sometimes I see questions like: what kind of transmission do I have, and what gear ratio do I have, did my Jeep come with the tow package, and when was my Jeep built?

Questions about what factory options your Jeep came with can be answered by downloading the build sheet for your vehicle. All you need is your VIN number.

http://fcacommunity.force.com/RAM/s/equipment-listing

The link above should work for any FCA (now Stellantis) vehicle from the last 20 years or so.
 

jeepchic79

Full Access Member
Joined
Jul 14, 2010
Messages
641
Reaction score
34
Location
Northern Kentucky
I just added my vin to my mopar owner's and it told me everything. I sadly got the 4 speed with od in my 06
 

lfhoward

Wheel. Repair. Repeat.
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,449
Reaction score
2,710
Location
Philadelphia, PA
I just added my vin to my mopar owner's and it told me everything. I sadly got the 4 speed with od in my 06
The six speed manual would have been awesome. They did make a few KK’s with that in 08 but then discontinued it. I have the 4 speed automatic also.
 

jeepchic79

Full Access Member
Joined
Jul 14, 2010
Messages
641
Reaction score
34
Location
Northern Kentucky
The six speed manual would have been awesome. They did make a few KK’s with that in 08 but then discontinued it. I have the 4 speed automatic also.

I'm sure it's been asked but wouldn't a 6 speed interchange? Since we have the 3.7 or would it be a mess of work .
 

lfhoward

Wheel. Repair. Repeat.
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,449
Reaction score
2,710
Location
Philadelphia, PA
I'm sure it's been asked but wouldn't a 6 speed interchange? Since we have the 3.7 or would it be a mess of work .
It’s not the physical fitment that’s the issue necessarily. I’m sure that could be done. It is the electronics that would make it impossible without some kind of professional tune for lots of $$$. Or at least that would be the case on the KK.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,650
Location
Southeastern Ohio
Worked on all 3 of mine,
had done it years ago, but thought I'd run them again
 

lfhoward

Wheel. Repair. Repeat.
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,449
Reaction score
2,710
Location
Philadelphia, PA
I just ran my 08 through it and it worked. I experimented a bit and found out it IS case sensitive, and will not work if you use any lower case letters. Hope this helps!
 

David13

Full Access Member
Joined
Dec 12, 2020
Messages
256
Reaction score
121
Location
Central Utah Rocky Mtns
I just ran my 08 through it and it worked. I experimented a bit and found out it IS case sensitive, and will not work if you use any lower case letters. Hope this helps!


That was the first thing I tried and it worked. But I thought I might have had a digit or letter error also.
dc
 

profdlp

Fired
Joined
May 21, 2013
Messages
5,835
Reaction score
1,804
Location
Westlake, Ohio
Check if you have a pdf handler in your browser. I initially had trouble but but messed with a setting and it popped right up.
 

Latest posts

Top