Front bearing issue I believe
- Thread starter nnote
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
what kind of noise
could be bearing, does it get louder if turning one way over the other
Could also be theCV and Intermediate shaft as well, when worn out they make a heck of a noise
if CV then NAPA remanned ONLY as a replacement with a new intermediate shaft
could be bearing, does it get louder if turning one way over the other
Could also be theCV and Intermediate shaft as well, when worn out they make a heck of a noise
if CV then NAPA remanned ONLY as a replacement with a new intermediate shaft
I've never heard a wheel bearing rattle. Get under there and start wiggling stuff.
its the marbles being spun in a tin can sound. Mostly between 35 and 50 or so. It's hard to tell if there's any droning as my tires are on the aggressive side so road noise...
I dont get any extra or different noises when turning. I also got a clank (not a clunk) over cracks in the road in the right mid to front side. Checked the exhaust shield, banged quite a bit on the front right door to see if it's in there. Might be sway bar link but it seems good. I do know I need to change out my ball joints.
I dont get any extra or different noises when turning. I also got a clank (not a clunk) over cracks in the road in the right mid to front side. Checked the exhaust shield, banged quite a bit on the front right door to see if it's in there. Might be sway bar link but it seems good. I do know I need to change out my ball joints.
Get the ball joints done ASAP !
almost daily people on Fakebook are complaining about their ball joints breaking/ falling out, due to never checking them or changing them when they know they are bad
Similar threads
