I want to add fog and driving lights to my 2005 Liberty, but it looks like the metal part of the front bumper stops to soon, and I think i would be drilling into plastic. Is there a diagram showing the 2 parts of the bumper? Also, how do I remove the plastic (bumper cover?) from the vehicle? Maybe I can add metal under the bumper cover?
front bumper?
- Thread starter XWrench3
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
turblediesel
memberable
There are places along the plastic bumper cover that overlap the thicker plastic beneath the bumper cover that are probably strong enough for lights. I didn't drill mine but I did measure and mark it when it was apart. Measurements are in a May 2021 post "2005 Liberty sport fog light question", post #4.
Last edited:
Turblediesel I will add the link you are describing above for you.
https://www.jeepkj.com/threads/2005-liberty-sport-fog-light-question.77134/
https://www.jeepkj.com/threads/2005-liberty-sport-fog-light-question.77134/
Gyro
Full Access Member
LED light bar on bumper, I've been searching!
First of, I've been using the search button and found a couple potential threads that I've bumped but most of them have been pretty old so not sure if I'll get replies on them. I'm searching for info on mounting like a 10"-25" wide LED light bar on the front bumper and saw some discussion...
www.jeepkj.com
That bar comes in 2&4 light mounts.
Gyro
That looks awesome! What a clean mod.see pics post#2LED light bar on bumper, I've been searching!
First of, I've been using the search button and found a couple potential threads that I've bumped but most of them have been pretty old so not sure if I'll get replies on them. I'm searching for info on mounting like a 10"-25" wide LED light bar on the front bumper and saw some discussion...
That bar comes in 2&4 light mounts.
Gyro
Deb'nKJ
Full Access Member
- Joined
- Jun 3, 2022
- Messages
- 633
- Reaction score
- 535
Does this help?
"If you're going to mount lights by just drilling into the bumper there is a black plastic under-bumper part that backs up the grey bumper cover in some places and not in others. Your light mounting will be more rigid if it goes through both pieces of plastic than if you just drill a random hole in the grey bumper cover. Take a look from underneath and you should be able to see the stronger overlap places.
I marked my bumper cover when I had it apart. From the center of the Jeep to the sides the strongest points are 6", 11", and 15". Also measure 3" out from the vertical lip at the back of the top of the bumper cover. The lip is hidden under the grill."
"If you're going to mount lights by just drilling into the bumper there is a black plastic under-bumper part that backs up the grey bumper cover in some places and not in others. Your light mounting will be more rigid if it goes through both pieces of plastic than if you just drill a random hole in the grey bumper cover. Take a look from underneath and you should be able to see the stronger overlap places.
I marked my bumper cover when I had it apart. From the center of the Jeep to the sides the strongest points are 6", 11", and 15". Also measure 3" out from the vertical lip at the back of the top of the bumper cover. The lip is hidden under the grill."
turblediesel
memberable
Deja-vu!
