Front Suspension Top Plate Availability

[tyates007]

Time to replace the suspension on my 2004 KJ. Decided to go with OME components and will upgrade UCA with JBA as well while I have it apart. Wondering if there is a company still making the 1/4” top plates? Search is coming up with not much. Only place I have found potentially is Rusty’s Off Road. Thanks to this group I have the other component in the shop already waiting to install. Top plate not required but thought I would ask.

• JBA UCA
• OME 927 front springs
• OME 948 rear springs
• OME 90009 front struts

• 6 conduit nuts 2”
• OME N132L rear shocks
• 4 hockey pucks for rear
• 4 upper rear shock isolators
• 2 3/8”x2 1/2” bolt with lock nut and washers for hockey pucks
• 2 Teraflex 1903200 bump stops for front

 

[KJowner]

Search for

Boiler's 3/8" shims or equivalent?​

On here and you will find it, I printed it out a few times adjusting the size until I got the correct dimensions of a template, made the job easier.

 

[LibertyTC]

See post 2 here for drawing, not sure who still sells them. I used 3/8 steel top plate.
https://www.jeepkj.com/threads/boilers-3-8-shims-or-equivalent.76937/

 

[tyates007]

Thank you both

 

[Doing10to20]

Rocky road outfitters sells them..I have a set installed