Got some new JBA UCA's!!

[BjBnet]

Only problem is that I pounded all afternoon on the left rear UCA bolt and it's still not out. I heated it several times and tried penetrating oil, the sucker just won't budge.
And now it's raining. I haven't even done the other side yet....

Any suggestions on how to take that bolt out? It
seized with the UCA bushing.
Thanks

 

[bigBlue]

which side? driver or passanger? front or rear bolt?

 

[yellocoyote]

Had to use an air hammer on a buddy's stock left rear UCA bolt to get it loose... and even then it took awhile.

 

[BjBnet]

which side? driver or passanger? front or rear bolt?

did you read my post? nono.gif

 

[BjBnet]

HA! Got the sucker out. All the other bolts came out no problem.
I ordered new nuts and bolts and will be greasing those suckers good, their supposed to arrive at the dealer's tomorrow morning.
The UCAs are SEXAY!!! Can't wait to get them on. Is it necessary to get an alignment after replacing them?
Thanks

 

[kj924]

Is it necessary to get an alignment after replacing them?
Thanks

Yes, you will need to get her aligned again.

 

[Porkchop]

director.gifPictures please

 

[tjkj2002]

DON"T GREASE THEM!!!!!!!!!!!!!!!!!!!!!!!!!!!!

They will loosen if you do.

 

[BjBnet]

DON"T GREASE THEM!!!!!!!!!!!!!!!!!!!!!!!!!!!!

They will loosen if you do.

Not the ball joints just the bolts shafts where they mount in the frame

 

[BjBnet]

director.gifPictures please

pervert! leghump.gif
rofl2.gif

Because the dealer screwed those pics will come a little later....they were supposed to have some bolts for me this morning......