Help with deciding how to lift my KJ properly.

[acastillo]

Hello guys, I hope you are doing well today.

I'm hoping Tommudd reads this.

I've read some comments on the jeep liberty threads and I want to ask for your help. I currently have a 2006 jeep liberty 4x4 and I have the following setup:

- Front Bilstein 4600 shocks, I used the factory spring and strut mount
- I lifted it with the Rough Country 3'' kit that they used to sell, it has the aluminum spacers for the front and coils + shocks for the rear
- JBA off road UCAs

I've been wanting to change the lift kit for something more stable, I do feel the suspension is too hard and I've been experiencing lower ball joint failure like 3 times. What would you recommend to get and what size of tires would you recommend too?

I hope to read from you soon, thank you in advance! Happy Holidays.

 

[HoosierJeeper]

I'd do OME 927 and OME 948 springs front/rear, Bilstein shocks up front for a stock KJ (I have the 4600 ones but would be curious to try 5100s) or get OME shocks for the front. Rear, always had bad luck with the Bilsteins blowing so get the OME 132Ls for the rear. Hockey puck or teraflex bump stops for the rear, teraflex for the front. Throw away the RC stuff. Good on having the JBAs! Also check your strut mounts, make sure that little bushing in the middle is still solid. if it breaks free it makes a ton of noise, worth checking. Rare issue but both of mine went bad.

Tire size - 245/75/16 or equivalent for whatever rim you're running. Not really worth it to go bigger IMO.

 

[acastillo]

I'd do OME 927 and OME 948 springs front/rear, Bilstein shocks up front for a stock KJ (I have the 4600 ones but would be curious to try 5100s) or get OME shocks for the front. Rear, always had bad luck with the Bilsteins blowing so get the OME 132Ls for the rear. Hockey puck or teraflex bump stops for the rear, teraflex for the front. Throw away the RC stuff. Good on having the JBAs! Also check your strut mounts, make sure that little bushing in the middle is still solid. if it breaks free it makes a ton of noise, worth checking. Rare issue but both of mine went bad.

Tire size - 245/75/16 or equivalent for whatever rim you're running. Not really worth it to go bigger IMO.

Thanks a lot!

I was looking up the shocks that came with the RC kit, it says it should have 2'' lift in the back. I honestly haven't had any issues with the back side of it but do you think it will not be leveled if I just do the front with the OME springs and the shocks I already have? They're the Bilstein 4600s.

Also, will having JBA UCAs affect even if it's not lifted over 3''?

N3 Rear Shocks | 0-2" | Jeep Liberty 2WD/4WD (2002-2012)

N3 Rear Shocks | 0-2" | Jeep Liberty 2WD/4WD (2002-2012)

www.roughcountry.com