Here's mine - Got her by default but she's growing on me....

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

cohippy

Full Access Member
Joined
Apr 2, 2010
Messages
44
Reaction score
0
Location
El Paso, Tx - For now
- 2005 Jeep Liberty Renegade, 3.7L V6 -

So the wife got a new car a couple months back and I sold my GLI, so I got this. Wasn't super thrilled at first but as I put work into her I'm liking it more and more. Post your comments and suggestions.

Current mods:
-Installed an EVIC and Auto-Dimming Mirror

-Rancho 17505's w/ SkyJacker HD (non-Soft Ride) Springs (Front)
-Rancho 17004's w/ SkyJacker HD (non-Soft Ride) Springs (Rear)
(This is the lift that tjkj2002 had on Gila Monster)

-Shaved front bumper

Next on the bill:
-Need to put 2 Rear Upper Spring Isolators on each side to get it leveled out, work on that rake...
-either 265/75-15's or 32/10.50-15's
-Front hitch from TBJ (soon)
-Cragar Soft 8's or Cragar 342's - 15x8 w/ 4.75" BSing (Leaning towards the 342's, we'll see)
 

Attachments

  • Liberty Lifted_1.jpg
    Liberty Lifted_1.jpg
    95.1 KB · Views: 56
  • Liberty Lifted_3.jpg
    Liberty Lifted_3.jpg
    91.8 KB · Views: 52
  • Liberty Lifted_4.jpg
    Liberty Lifted_4.jpg
    87.7 KB · Views: 52
  • Front Lifted.jpg
    Front Lifted.jpg
    90.7 KB · Views: 33
Last edited:

Dave

Administrator
KJ Supporting Member
KK Supporting Member
Joined
Feb 22, 2006
Messages
15,567
Reaction score
16
Location
on here
Nice black renne.

Dave
 

Midgear

New Member
Joined
Nov 23, 2009
Messages
897
Reaction score
0
Location
Mcalester, OK
looks like it could use an alignment.. or that picture is playing tricks on me eyeballz.

nice lookin Jeep!
 

mag03kj

Banned
Joined
Dec 6, 2009
Messages
2,576
Reaction score
0
Location
LOST
What coils did TJKJ2002 use on that lift? I might just go all out since i dont have to worry about cv's!!
 

kj924

Administrator
Joined
Dec 9, 2007
Messages
3,363
Reaction score
1
Location
Prince Edward Island,Canada
Nice lift cohippy, told ya you would be happy with it.;) Now, just get the alignment done and some new meats and you will be in happy land. :D


Geekyjeep: Anything over 3.5" and you will start running into CV troubles. :)
 

cohippy

Full Access Member
Joined
Apr 2, 2010
Messages
44
Reaction score
0
Location
El Paso, Tx - For now
They're Skyjacker non-Softride springs, front and back. They've got a higher spring rate than OME HD springs
 
Last edited:

mag03kj

Banned
Joined
Dec 6, 2009
Messages
2,576
Reaction score
0
Location
LOST
Well did you do a b4 and after? Or what size was the lift? 2.5? 3? 3.5?
 

cohippy

Full Access Member
Joined
Apr 2, 2010
Messages
44
Reaction score
0
Location
El Paso, Tx - For now
BEFORE:

Front Left - 18.50"
Front Right - 18.50"

Rear Left - 19.00"
Rear Right - 19.25"

AFTER:

Front Left - 23.50"
Front Right - 23.50"

Rear Left - 21.00
Rear Right - 21.25"
(Still have to put the 2 Upper Insulators on each side, should help level it out)
 
Last edited:

cohippy

Full Access Member
Joined
Apr 2, 2010
Messages
44
Reaction score
0
Location
El Paso, Tx - For now
- First Mod's -
Here's the EVIC and the Auto-Dimming Mirror (both an awesome find at a junk-yard!! Came off an 06 KJ Ltd), had just the map lights in there before. Ran the wiring 3 times! Third time's a charm though, right? First 2 to the ODB II then finally to the back left pillar as they do in the factory. It has the sunroof switch on it which I'll eventually wire to a winch, we'll see what the future holds.
 

Attachments

  • IMG_3855.jpg
    IMG_3855.jpg
    82.3 KB · Views: 14
Last edited:

cohippy

Full Access Member
Joined
Apr 2, 2010
Messages
44
Reaction score
0
Location
El Paso, Tx - For now
I know it ended up to be more than I expected! may have to do the CV's and still need UCA's, we'll see.

Any thoughts or suggestions anyone? Don't want to go too wild and crazy right off the bat.

So Far...
Lift - $300
EVIC - $60
Mirror - They threw it in for free since I got the EVIC and all 6 Speakers from the Limited
Bumper - Just my time (well worth it)

Trying to keep cost down as much as possible...
 
Last edited:

cohippy

Full Access Member
Joined
Apr 2, 2010
Messages
44
Reaction score
0
Location
El Paso, Tx - For now
**UPDATE**

BEFORE:

Front Left - 18.50"
Front Right - 18.50"

Rear Left - 19.00"
Rear Right - 19.25"

AFTER:

Front Left - 23.50"
Front Right - 23.50"

Rear Left - 22.50"
Rear Right - 22.50"
(Put in the 2 upper Insulators on each side, total of 3/side)
 

Attachments

  • FL Susp.jpg
    FL Susp.jpg
    91.9 KB · Views: 12
  • FR Susp.jpg
    FR Susp.jpg
    90.8 KB · Views: 10
  • LR Susp.jpg
    LR Susp.jpg
    89.5 KB · Views: 11
  • RR Susp.jpg
    RR Susp.jpg
    89.2 KB · Views: 11
  • Lift Kit.jpg
    Lift Kit.jpg
    62.3 KB · Views: 16
Last edited:

cohippy

Full Access Member
Joined
Apr 2, 2010
Messages
44
Reaction score
0
Location
El Paso, Tx - For now
Lift complete, just need some meats! I'll get a side shot tomorrow.
 

Attachments

  • Lift Complet.jpg
    Lift Complet.jpg
    91.6 KB · Views: 11
  • Lift Complete.jpg
    Lift Complete.jpg
    93.7 KB · Views: 12

Latest posts

Members online

Top