hood vents

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

XWrench3

Full Access Member
Joined
Sep 30, 2020
Messages
184
Reaction score
44
I have been contemplating cutting holes in my hood to install a couple of vents in it. I want this primarily for trail riding, to reduce the under hood temperatures. The biggest concern I have is if the water coming thru the vents will mess up the electronics, or crack the exhaust manifolds. we are in "monsoon season" here now. I would be interested in photo's if anyone has done this to your Liberty. Thanks.
 

duderz7

Full Access Member
Joined
Jan 20, 2016
Messages
1,521
Reaction score
1,270
Location
Weiser, ID
You must be registered for see images attach
not the best picture, but if you zoom in a bit...I suggest placing them toward the back of the engine bay and also toward the outside so they're between the engine and body. Another consideration comes from the air cooled VW days. Put spacers under your hinges and just open up the gap at the back of the hood/windshield cowl. There is also a rubber seal at the cowl and hood that can be removed to open up that area without messing with anything else.
 

Deb'nKJ

Full Access Member
Joined
Jun 3, 2022
Messages
634
Reaction score
540
Location
somewhere between London & Zunny Deb'n (England)
Proper factory vents have drip trays, so a scratch round a junk yard might pay dividends.

Jacking up the trailing edge of the hood is popular in XJ circles (or was), in fact, you can still get a kit (2 blocks + 4 longer bolts) but, unlike in a rear-engined application, the hot (& contaminated) air vents immediately in front of the fresh air intake for the cabin.
 

duderz7

Full Access Member
Joined
Jan 20, 2016
Messages
1,521
Reaction score
1,270
Location
Weiser, ID
Proper factory vents have drip trays, so a scratch round a junk yard might pay dividends.

Jacking up the trailing edge of the hood is popular in XJ circles (or was), in fact, you can still get a kit (2 blocks + 4 longer bolts) but, unlike in a rear-engined application, the hot (& contaminated) air vents immediately in front of the fresh air intake for the cabin.
Good point on the intake vents. The air cooles VW's get their heat directly off the exhaust, you can always tell when there's a hole in the pipe.o_O
 
Top