Is 22" too much for the front Hub to Flare

[Moab]

Trying to find out if 22" on the front - center of front hub to bottom of front flare is too much or will the components be OK. I'm trying to figure out where I want the truck to sit so I can decide how to proceed with springs and shocks. Thanks for any help.

 

[rockymountain]

Search a bit on here, but I think you don't run into trouble until 23.5 - 24. and by trouble I mean CV joints on the front. Mine sits at 22 with boilers plates and OME 927s.

 

[tommudd]

24s too much
you will be real safe staying in the 22.5 to 22.75 inch range
going over 23.25/23.50 is when you start having problems
Mines been at 23 plus for a long time, had it higher but had some strange noises

 

[Moab]

Thanks for the help and info.

 

[tjkj2002]

24s too much

I'm at 29"rockon.gif

 

[tommudd]

I'm at 29"rockon.gif

Show off !!!!

 

[incommando]

Not all of us have things to compensate for...

 

[Red_KJ_666]

I'm at 22.5" right now 15'000KM on the lift and no problems. I replaced my CV's when I did the lift as they where shook.

 

[Moab]

Were the CV's shot because of the lift or because of heavy offroad use or both?
Just wondering what I have in store. I want mine at 22". It will look great with the rear at its' present position.