Looking for this part turn signal assembly

[bladerunner555]

I need this small piece that is for passenger side turn signal assembly.

You must be registered for see images attach

The piece that I am holding my hand in my hands screws in to it.Mine is an '07.

You must be registered for see images attach

 

[Deb'nKJ]

Assuming that fits into a square hole, can't you use one of the plastic plugs that appear in another picture, which are readily available?

 

[bladerunner555]

I have that metal piece and the screw.i need the part shown in the first pic.Mine is missing from one side

 

[KJowner]

You could probably cut one out of a cheap plastic chopping board or order a bit of nylon rod off Ebay or wherever if you can't get hold of one.

 

[tomlinsonml]

My sons ride also had one missing after we got it for him, i used a 1/4in nylon nut which is square from orielys. They are on the rotating racks. I just had to trim it down a touch but worked perfectly.

 

[bladerunner555]

Thanks for the info.I did try the 2 local Pick N Pulls,but all the KJs were already stripped of anything I need.