low oil pressure after general inspection. KJ 2006 3.7

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

KJlibertyBR

New Member
Joined
Jan 31, 2025
Messages
1
Reaction score
0
Sou brasileiro e tenho um Kj 2006 3.7, aqui no Brasil esse veículo é raro, então não tem muito conteúdo sobre ele.

Acontece que a luz de pressão do óleo está acendendo em marcha lenta, isso ocorreu após a manutenção do motor. O cabeçote foi retrabalhado, os pistões e anéis foram substituídos, todas as juntas e mancais da biela (como não removi o virabrequim porque não estava riscado, mantive os mancais fixos e também não vi como estavam), todas as peças foram trocadas sem manutenção STD.

Motor a princípio tudo ok, o mecânico não quis trocar a bomba de óleo porque disse que como tem engrenagens não perde pressão. Porém, agora que o motor está montado, a luz do óleo começa a acender quando o motor está quente e em marcha lenta (80°)
Eu pergunto a vocês, que estão acostumados, esses motores costumam ter bomba de óleo com defeito? O motor tem válvula de alívio de pressão que pode estar com defeito?

Eu uso óleo 10w40 (na minha cidade a temperatura fica sempre em torno de 15 a 30°), fiz manutenção no motor porque ele começou a soltar muita fumaça na primeira partida, então aproveitei e fiz uma revisão geral.
 

LibertyTC

Well-Known Member
Staff member
Moderator
Joined
Oct 24, 2008
Messages
9,201
Reaction score
1,847
Location
B.C. Canada
Translated:
I'm Brazilian and I have a 2006 Kj 3.7. This vehicle is rare here in Brazil, so there isn't much information about it.The thing is that the oil pressure light is coming on at idle. This happened after engine maintenance. The cylinder head was reworked, the pistons and rings were replaced, all the gaskets and connecting rod bearings (since I didn't remove the crankshaft because it wasn't scratched, I kept the bearings fixed and also didn't see how they were), all the parts were replaced without STD maintenance.The engine was ok at first, the mechanic didn't want to change the oil pump because he said that since it has gears it doesn't lose pressure. However, now that the engine is assembled, the oil light starts coming on when the engine is hot and at idle (80°).I ask you, who are used to it, do these engines usually have a faulty oil pump? Does the engine have a pressure relief valve that could be faulty?I use 10w40 oil (in my city the temperature is always around 15 to 30°), I did maintenance on the engine because it started to smoke a lot when it was first started, so I took the opportunity to do a general overhaul.
 
Top