ms5490renegade
Banned
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
My Renegade
- Thread starter ms5490renegade
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
ms5490renegade
Banned
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Looks good !
ms5490renegade
Banned
thanks tom
yellocoyote
Administrator
Very cool, Matt! 
ms5490renegade
Banned
gracias amigos y amigas
ptsb5a
Full Access Member
Good wrok Matt, looks freakin' awesome. Get man tires on it before TBJ says anything.
Very nice, makes the TJ look like a toy..
JeepINgeek
Silver Supporter
looks nice.. is the rear sitting low or does it just appear to be?
you doing man tires?
you doing man tires?
ThunderbirdJunkie
Bronze Supporter
Good wrok Matt, looks freakin' awesome. Get man tires on it before TBJ says anything.
Oh ThunderbirdJunkie has said a lot.
Somebody buy this boy some 15x7s and 34x950 TSLs!
TAHOE
Full Access Member
JeepINgeek
Silver Supporter
hey, ill be running my ATs for atleast a year or two
ms5490renegade
Banned
You must be registered for see images attach
You must be registered for see images attach
ms5490renegade
Banned
i have a feeling this might get ugly. im going to post all of my emails with rock krawler
The images are not that great, but it does not appear that the joint was out of misalignment up there! Can you supply further images like ****** skid that was still under there and the entire driveshaft? The Jeep Appears to be sitting correctly from the one image....
Jeremy
----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Monday, June 14, 2010 12:02 PM
Subject: [Norton AntiSpam] driveshaft issue
2nd message
I got this email, but have not recieved any other follow up emails since the first one.
It is hard for us to tell if you did anything wrong from the pictures I recieved. Like I said, we have not heard of anyone having any issues with the front driveshafts on any of the 3.5" kits. Maybe it could have been damaged during installation when the axle was sitting at full droop? Not exactly sure. Some of the forums would be a good reference for you.
Jeremy
----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Thursday, June 17, 2010 2:39 PM
Subject: driveshaft
its been a few days and i havent heard anything. i wasnt sure if you had received my last email. If you could please message me back to let me know you have received my messages, i would really appreciate it.
thanks,
matt
3rd message
Why is the front track bar not in the vehicle. Can you provide me with some spring measurements? Where did you get the kit from?
----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Thursday, June 17, 2010 4:37 PM
Subject: Fwd:driveshaft issue
-----Original Message-----
From: [email protected]
To: [email protected]
Sent: Mon, Jun 14, 2010 1:11 pm
Subject: Re: [Norton AntiSpam] driveshaft issue
unfortunately all i have is a cell phone to take pictures with.
4th message
Why would you drive it without the front track bar? your front axle would be side shifted way too much which also puts further stress on the drive line.
I need solid numbers on the coil springs to ensure you have the right ones. Both Front and Rear. If 4WP shipped it out of inventory we know there is one kit out there that is wrong because we have already corrected the other one.
Jeremy
----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Thursday, June 17, 2010 5:08 PM
Subject: Re: driveshaft issue
we were putting it on the same day i smelled the burning.
i know the front springs were 18.5 inches or so.
4 wheel parts. i have skyjacker nitro shocks
im really not sure how this will play out. they seemed to be receptive on the phone but now they are almost insinuating it made a mistake
The images are not that great, but it does not appear that the joint was out of misalignment up there! Can you supply further images like ****** skid that was still under there and the entire driveshaft? The Jeep Appears to be sitting correctly from the one image....
Jeremy
----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Monday, June 14, 2010 12:02 PM
Subject: [Norton AntiSpam] driveshaft issue
2nd message
I got this email, but have not recieved any other follow up emails since the first one.
It is hard for us to tell if you did anything wrong from the pictures I recieved. Like I said, we have not heard of anyone having any issues with the front driveshafts on any of the 3.5" kits. Maybe it could have been damaged during installation when the axle was sitting at full droop? Not exactly sure. Some of the forums would be a good reference for you.
Jeremy
----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Thursday, June 17, 2010 2:39 PM
Subject: driveshaft
its been a few days and i havent heard anything. i wasnt sure if you had received my last email. If you could please message me back to let me know you have received my messages, i would really appreciate it.
thanks,
matt
3rd message
Why is the front track bar not in the vehicle. Can you provide me with some spring measurements? Where did you get the kit from?
----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Thursday, June 17, 2010 4:37 PM
Subject: Fwd:driveshaft issue
-----Original Message-----
From: [email protected]
To: [email protected]
Sent: Mon, Jun 14, 2010 1:11 pm
Subject: Re: [Norton AntiSpam] driveshaft issue
unfortunately all i have is a cell phone to take pictures with.
4th message
Why would you drive it without the front track bar? your front axle would be side shifted way too much which also puts further stress on the drive line.
I need solid numbers on the coil springs to ensure you have the right ones. Both Front and Rear. If 4WP shipped it out of inventory we know there is one kit out there that is wrong because we have already corrected the other one.
Jeremy
----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Thursday, June 17, 2010 5:08 PM
Subject: Re: driveshaft issue
we were putting it on the same day i smelled the burning.
i know the front springs were 18.5 inches or so.
4 wheel parts. i have skyjacker nitro shocks
im really not sure how this will play out. they seemed to be receptive on the phone but now they are almost insinuating it made a mistake
ms5490renegade
Banned
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
my jeep with be a combination of all of these
ms5490renegade
Banned
i will be getting these parts hopefully by december.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
ms5490renegade
Banned
You must be registered for see images attach
ms5490renegade
Banned
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
ThunderbirdJunkie
Bronze Supporter
Nice air freshener
