OscarMike/Howard Hughes Liberty Concept
- Thread starter RENEGADE Concept
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
dude1116
Full Access Member
Very nice. I like the "steampunk" type of look.
TwoBobsKJ
Full Access Member
Really admire your skill - looks great!
Question: You have a 'theme' going with the various light switches, including for the Renegade light bar. Did you replace the factory light bar switch? If so, what did you install in it's place? And does the dash light still work?
The relay in my factory switch took a dump and I want to replace it with a Carling-style switch but not sure of which configuration I need in order to wire in a new relay and keep the dash light and switch light operable.
Again, great job!
Bob
Question: You have a 'theme' going with the various light switches, including for the Renegade light bar. Did you replace the factory light bar switch? If so, what did you install in it's place? And does the dash light still work?
The relay in my factory switch took a dump and I want to replace it with a Carling-style switch but not sure of which configuration I need in order to wire in a new relay and keep the dash light and switch light operable.
Again, great job!
Bob
RENEGADE Concept
Full Access Member
Jim -
Maybe I'll be a case modder in this life. ;-). I'll add it to my list of creative pursuits. I paint, draw, and photograph. I reclaim vintage things and make furniture. I make frames, jewelry, random inventions, radio controlled vehicles and even rc ornithopters. Given my variety of creations, i've been told In another life I was probably Leonardo DaVinci. Lol
Maybe I'll be a case modder in this life. ;-). I'll add it to my list of creative pursuits. I paint, draw, and photograph. I reclaim vintage things and make furniture. I make frames, jewelry, random inventions, radio controlled vehicles and even rc ornithopters. Given my variety of creations, i've been told In another life I was probably Leonardo DaVinci. Lol
Last edited:
RENEGADE Concept
Full Access Member
RENEGADE Concept
Full Access Member
Yeah, I didn't necessary start out trying to do something Steampunk or Dieselpunk looking, but as i took things further and further, and had more fun with it, I did realize at one point that it did start to have a SciFi Dieselpunk look. So who knows maybe some comic con cosplayer will buy it from me. Lol
RENEGADE Concept
Full Access Member
Impact guards
The impact guards ( or window button guards) on the center console are actually matte chrome (which is basically satin silver) drawer pulls. They look just like old NASA or military control panel switch guards and the finish matches the console. Pretty awesome right? Lol. Where they put those buttons always annoyed me because you couldn't set anything there when you were getting into the vehicle. So I came up with that idea.
The fog light guards are actually rugged ridge headlight guards designed for the wrangler. While they are too small to fit the liberties headlights, with some careful and creative bending they can be made to fit very nicely around the liberties fog lights.
The impact guards ( or window button guards) on the center console are actually matte chrome (which is basically satin silver) drawer pulls. They look just like old NASA or military control panel switch guards and the finish matches the console. Pretty awesome right? Lol. Where they put those buttons always annoyed me because you couldn't set anything there when you were getting into the vehicle. So I came up with that idea.
The fog light guards are actually rugged ridge headlight guards designed for the wrangler. While they are too small to fit the liberties headlights, with some careful and creative bending they can be made to fit very nicely around the liberties fog lights.
Attachments
Last edited:
RENEGADE Concept
Full Access Member
Thanks for the compliments Bob.
. My renegade didn't actually come with the light bar, so there was no original switch. I had the light bar installed on the roof. And I installed the switches in the dash. but one is not connected to the other yet, since the electrical work isn't finished. I'm not sure how it will all be wired up to work but I've been told that it will. Lol.
Jo6pak
Full Access Member
A few touches are a bit garnish for me...but overall that's a really cool KJ.
Excellent work, very nice:winner_third_h4h:
Excellent work, very nice:winner_third_h4h:
RENEGADE Concept
Full Access Member
I'm glad you really like them. . But it would be hard to explain in words and pictures what I did to modify them, and then make them fit perfectly. There was a lot of creative problem solving involved. ;-). It would be easier to show someone in person.
. But it would be hard to explain in words and pictures what I did to modify them, and then make them fit perfectly. There was a lot of creative problem solving involved. ;-). It would be easier to show someone in person.
Damotee
Full Access Member
Fantastic!
I'm glad you really like them.
Do a video
Sent from my iPhone using Tapatalk
RENEGADE Concept
Full Access Member
RENEGADE Concept
Full Access Member
Do a video
Sent from my iPhone using Tapatalk
That would work, IF I had some new vents to work on.
boboborino
Full Access Member
I also agree with all the positive comments! I love it and keep posting. The coolest thing about this thread is when you explain your work, (i.e. the drawer pulls), "ya, those are great!" I'm going to have to give some of these a shot!
Thanks for this thread
Bert
Thanks for this thread
Bert
RENEGADE Concept
Full Access Member
Thanks Bert! I know a lot of what I did is over the top and not practical, but like a lot of jeep concept vehicles, it wasn't meant to be. Lol. But there are always bits and pieces from those concepts that do eventually make it on to other vehicles. I think the impact guards I made with those pulls is a good example of something that jeep could have done.
- Matt
Last edited:
RENEGADE Concept
Full Access Member
The hood star
Here is a nice photo of the Oscar Mike star I made for the hood. I wanted to use the actual Mopar decal for the hood, but i couldn't find a Mopar version in gray/graphite/charcoal color. Also the star made to be offset on the wrangler hood looked a little small centered on my liberty renegade hood. So I had the decal custom made to 23" and cut from top of the line metalic graphite gray vinyl. This stuff is guaranteed to last 12years outside! Then using the Mopar star as my pattern I hand cut the distressed lines into the star in exacting detail.
This is not a cheap eBay knockoff that has little detail and is going to fade and deteriorate.
Mounting it to the hood was tricky. While it may look in the photo like it was mounted too high on the hood, I assure you it just looks that way because of the wide angle lense of the camera. It was/is meticulously centered.
- Matt
Here is a nice photo of the Oscar Mike star I made for the hood. I wanted to use the actual Mopar decal for the hood, but i couldn't find a Mopar version in gray/graphite/charcoal color. Also the star made to be offset on the wrangler hood looked a little small centered on my liberty renegade hood. So I had the decal custom made to 23" and cut from top of the line metalic graphite gray vinyl. This stuff is guaranteed to last 12years outside! Then using the Mopar star as my pattern I hand cut the distressed lines into the star in exacting detail.
This is not a cheap eBay knockoff that has little detail and is going to fade and deteriorate.
Mounting it to the hood was tricky. While it may look in the photo like it was mounted too high on the hood, I assure you it just looks that way because of the wide angle lense of the camera. It was/is meticulously centered.
- Matt
Attachments
Similar threads
Latest posts
-
-
-
-
-
Temp going up when going over 60 mph in highway for long time- Latest: uss2defiant