Pulling instrument panel

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

libertybob

Full Access Member
Joined
Jan 31, 2015
Messages
210
Reaction score
3
Location
Lilburn
Light replacement

Not difficult to do but must follow sequence. 1. remove driver side pull handle (pull plastic plugs & 2 torx or 2 7mm screws), 2. remove two snap in rectangular trim pieces (one on each side of column) at bottom of instrument bezel, 3. pull up on 40" wide trim panel under bottom edge of windshield - snaps in 4. this exposes 4 7mm screws that hold instrument bezel on dash. remove 4 screws and bezel. 5. remove 4 screws that hold in the instrument cluster 6. unplug cables to cluster and remove. lights twist out in the back.

Warning: make sure to identify all the lights that are burned out before you start or test each one or you will repeat the job to get them all. Also the bulbs are special - not available at local parts stores. I had to resort to parts Liberty's but you can get them at the dealer or on the web.
 

TypeRx

Full Access Member
Joined
May 16, 2006
Messages
66
Reaction score
2
Location
Chicagoland
Does anyone have part numbers for the bulbs? A prior thread listed a part number but I wasn't able to find any matches with that p/n...


Sent from my iPhone using Tapatalk
 

Latest posts

Members online

Top