Ready to pull the lift trigger

[ghostrider]

Yes with 927 front springs, 1/4 inch top plate and 3/8 inch clevis you should be , well too high but 3.75 over new stock height or 22.75 .
Any noises from UCAs contacting the springs? Most time there is

No noises that I have heard, and I have been driving with the radio turned off in order to listen for anything abnormal. I can reach my fingers between the spring and UCA on each side pretty easily. I don't have any clue why it is sitting lower than it should be given the parts installed.

 

[tommudd]

No noises that I have heard, and I have been driving with the radio turned off in order to listen for anything abnormal. I can reach my fingers between the spring and UCA on each side pretty easily. I don't have any clue why it is sitting lower than it should be given the parts installed.

At your height no possible noises. At the height you should be there could possibly be noises

 

[ghostrider]

Any ideas as to why it's sitting lower than it should be?
At least the ride is great now, especially compared to what it was!