sparkman70
Full Access Member
Is the rear upper control arm and ball joint something i can do or let a pro do it. The price they gave me is close to 1000.00 and i think thats a hi price i know they need to make money but come on.:shrug:
Rear upper control arm
- Thread starter sparkman70
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Not that hard to do, but depends on how your abilities are, 3 bolts is all you remove and replace, some have problems with the exhaust being a little in the way but I never have
sparkman70
Full Access Member
thanks of the info tom
JeepKj03
Full Access Member
If it is something like just swaping one out for another it is not that hard at all.
http://www.jeep4x4center.com/product-information.asp?number=52088901AD
Check this out,was waiting on the Rev.
Check this out,was waiting on the Rev.
The dealer/ shop can replace the upper control arm ball joint.
It would be easier if done on a lift.
It is cheaper to just install a new control arm with new bushings and BJ, however I would keep the Jeep's OEM control arm and press in new Spicer bushings and install a new ball joint for strength. The Jeep's control arm is fairly beefy.
http://www.jeep4x4center.com/jeep-steering-parts/liberty-kj.htm
It would be easier if done on a lift.
It is cheaper to just install a new control arm with new bushings and BJ, however I would keep the Jeep's OEM control arm and press in new Spicer bushings and install a new ball joint for strength. The Jeep's control arm is fairly beefy.
http://www.jeep4x4center.com/jeep-steering-parts/liberty-kj.htm
sparkman70
Full Access Member
Again thanks for the info i just have a hard time paying that price for something thats 160 bucks
