Regear help to 4.10s

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JJam2112

Full Access Member
Joined
Aug 14, 2019
Messages
94
Reaction score
8
Location
Port Angeles, WA
Hey Guys, so I had some issues with some gears locking up and it is looking like I need to replace some and thought maybe this is the time for me to upgrade to 4.10s.

I am looking for help to make sure to purchase the right thing. My Libby is a 2006 6 speed manual transmission. Axel swap is not a option for me, so just going to replace the front and rear gears to 4.10s. Any help would be appreciated. Thanks
 
Last edited:

jeeptorino68

Full Access Member
Joined
Nov 28, 2011
Messages
931
Reaction score
81
Location
Oregon
For the rear end, any 4.10 gear kit and master install kit from a supplier you like/trust.

For the front, must be Spicer/dana, and must be for the Dana 30a parts for the dana 30 will not work
 

JJam2112

Full Access Member
Joined
Aug 14, 2019
Messages
94
Reaction score
8
Location
Port Angeles, WA

duderz7

Full Access Member
Joined
Jan 20, 2016
Messages
1,501
Reaction score
1,257
Location
Weiser, ID
If it were me going to all the trouble and expense, I would look seriously at a locker or LSD
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,649
Location
Southeastern Ohio
MOST ALL places that sell gears do not know the difference between a Dana 30a and a Dane 30, they will tell you they fit and then you buy everything and they do not Beware of where you buy
If you are going to wanting a locker do it right from the get go and none of those lunch box LSDs
Detroit Tru Trac is a great starting point

4WP is a great place to shop if you drive a Wrangler
 
Top