speedometer issues

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Josh_9096

New Member
Joined
Jan 8, 2017
Messages
10
Reaction score
0
Location
Wisconsin
02 liberty limited. I took the cluster apart to replace the bulbs. I was trying to make LEDs fit so I took everything apart and took all the needles off. When. I put it back together the speedo was 20 mph off so I took it apart again to move the needle. Now the speedo won't move at all. Help!
 

GunnerSchenck

Full Access Member
Joined
Dec 24, 2014
Messages
850
Reaction score
9
Location
Sugar Grove, Warren County, Pennsylvania
Shouldn't the bulbs(leds or not) just twist inton the backside without disassembling the cluster itself? You may be in the market for a new cluster now.. not sure if the dealer can do a calibration to fix this or not.. but if you end up needing a new cluster then you may need to go to a dealer afterwards and be sure to make note of your mI leave before replacement
 
Top