Taking it in for 4.10 gears

[jeeptorino68]

Hey guys
Taking the liberty in on Monday for 4.10 gears and front axle shafts. I am taking all my own parts. (napa reman cv shafts. And 4.10 gear sets)

My question is. Is there anything specific I should look or ask for to make sure they do the job right? Photos of the gear pattern maybe?

 

[Hedsic]

lockers

 

[tommudd]

If you trust the shop then should be nothing, if you don't trust them, well would be too late even if you did have pictures

 

[the_dealer]

Now would be a good time to reasearch how to properly break in new gears.

Sent from my G870a on 38's.

 

[jeeptorino68]

Good point but they are used gears I got from a member on the site. I checked them over, look like they are in good shape

 

[Gyro]

Master install kit?

Gyro

 

[WickedBruce]

They are already broken in, but it never hurts to take it easy on them for a few hundred miles

 

[TwoBobsKJ]

If there's gear whine when you first start driving it - the setup is wrong and there's nothing that can be done to undo the whine.

If they're quiet when you first drive it then you're good to go :waytogo:

Bob

 

[tommudd]

Good point but they are used gears I got from a member on the site. I checked them over, look like they are in good shape

Oh,...that changes everything
I never ran used gears sourced from someone else never trusted them

UPDATE, after reading on and seeing Bobs post, totally agree with him
Hopefully no whine

 

[M38 Bob]

If there's gear whine when you first start driving it - the setup is wrong and there's nothing that can be done to undo the whine.

If they're quiet when you first drive it then you're good to go :waytogo:

Bob

And LUCKY!!!!!!!!!

bOB

 

[jeeptorino68]

im sure they will work great Bruce!
i have run used gears in my 69 bronco, no problems. knock on wood