Had a fun trail weekend with the Liberty and found out I had the smallest cooling package possible and that I need to clean her up before bed after hitting the mud. On day two, dirty sand and mud from day 1 ruined the tensioner pulley and the only factory electric fan I had. After allot of digging and cleaning we had to tow her out with no power steering, water pump or cooling fans working behind a jeep gladiator. Long story short and some O’Reilly parts we made it home and I’ve been reworking/upgrading the cooling system to the Liberty tow HD kit with a mechanical fan, the new electric fan and hybrid shroud plus an additional 14 inch elec fan I’ve added in the grill that I had to buy to get home. My question is about temps and when or how I should add in the extra fan as a back up to the system. Should I wire it to the high side of the factory 2 stage fan or add a temp sensor and set it at 200/205/210? My goal was to have the factory 2 stage fan be the primary, the aux elec be the next step to try and keep the manual clutch as the last resort and to keep the load off the motor. Also I might add some hood vents. Thoughts or ideas please share.
Manual fan with standard liberty clutch not HD clutch
Factory high low elect fan
14 inch O’Reilly fan
Manual fan with standard liberty clutch not HD clutch
Factory high low elect fan
14 inch O’Reilly fan