Transfer Case for manual the same as automatic?
- Thread starter KCS
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
yes, no, and it's complicated.
yes... NP231, NP241, and NP242 can be bolted up.
HOWEVER... 2WD manuals have a different tail snout than the 4WD equipped manuals. so you'll need that very specific part.
there's also the fact the NP241 is a more stout transfer case than the other two, to supposedly handle the higher shock loading of a manual.
there's a TON of threads here about it. basically, you really need a complete donor jeep to pull all the needed bits from to make it work.
yes... NP231, NP241, and NP242 can be bolted up.
HOWEVER... 2WD manuals have a different tail snout than the 4WD equipped manuals. so you'll need that very specific part.
there's also the fact the NP241 is a more stout transfer case than the other two, to supposedly handle the higher shock loading of a manual.
there's a TON of threads here about it. basically, you really need a complete donor jeep to pull all the needed bits from to make it work.
