What parts to add cruise control?

[guitarzan]

What all do I need to add cruise control to my '07? Is this very labor intensive or easy to do?

 

[LibertyFever]

I had the dealership add cruise control to my 04 Liberty. Besides installing the hardware on the steering wheel and the cruise control actuator the BCM needs to be programed.

I'm not positive about the 07 Liberty, if the installation involves messing with the steering wheel "clockspring" then I'd take it to the dealership.

 

[wolverine1020]

Not sure what's all involved but if you're going to try it out yourself here is a parts list from the 02.
Not sure how much different the 07 is but it may be helpful.

http://www.scribd.com/doc/3287544/Je...-Parts-Catalog

 

[wolverine1020]

I had the dealership add cruise control to my 04 Liberty.

How much they charge ya for that?

 

[tommudd]

Less than a 30 minute job, easy as doing n oil change
just mount a couple of things and install the buttons on the steering wheel, done
Jeep sells the whole kit pretty resonable

 

[guitarzan]

Less than a 30 minute job, easy as doing n oil change
just mount a couple of things and install the buttons on the steering wheel, done
Jeep sells the whole kit pretty resonable

Thanks Tom!

 

[dmnjr]

I did it. les than half an hour. Just ordered a kit from the dealer. You will only need the steering wheel buttons/wires. The 07 has an electronic throttle control. I disconnected the battery for half an hour, then removed the two bolts holding the airbag in, after that added the buttons.

 

[NanoCar]

What all do I need to add cruise control to my '07? Is this very labor intensive or easy to do?

Thats good to here mate.. Ill break your record.. less than 30mins.. LOL.. Got the same issue.. anyway, if you need some A/C ACC Temperature Sensor, then you know who to look for.. p:

 

[LibertyFever]

You didn't need to have the PCM programmed?

Glad to hear you got it done yourself. Happy cruising

 

[dmnjr]

No need to reprogramm the PCM on mine.

 

[TruLiberty]

I had the dealership add cruise control to my 04 Liberty. Besides installing the hardware on the steering wheel and the cruise control actuator the BCM needs to be programed.

I'm not positive about the 07 Liberty, if the installation involves messing with the steering wheel "clockspring" then I'd take it to the dealership.

how much did having the stealership do it run you?