Wheel offset backspacing wheel adapter help!!!!

[Renegade5]

Ok so i have 16x8 wheels with a 10 mm offset they fit fine no rubbing(i am lifted)but i hate them,i settled for them because the one i REALLY wanted were not available in the 5x4.5 bolt pattern so i want to try to figure out if i can get wheel adapters to change the bolt pattern to the wheels i want
my question is (and my head is hurting tryin to figure this out)
the wheel comes in +10 mm or -6mm offset,so which ones should i go with and what thickness wheel adapter???
thanx for any help
cheers

 

[tommudd]

Ok so i have 16x8 wheels with a 10 mm offset they fit fine no rubbing(i am lifted)but i hate them,i settled for them because the one i REALLY wanted were not available in the 5x4.5 bolt pattern so i want to try to figure out if i can get wheel adapters to change the bolt pattern to the wheels i want
my question is (and my head is hurting tryin to figure this out)
the wheel comes in +10 mm or -6mm offset,so which ones should i go with and what thickness wheel adapter???
thanx for any help
cheers

Tell me in inches of backspacing i.e 4 inch / 5 inch etc
also what width wheel you want.
If wanting say 7 inch, you would want a wheel with 5 inches of backspacing to use with an adapter. If 8 inches , well you'd need 6 inches of backspacing
We don't do mm here, went to school before some wanted to bring the metric system here :gr_grin:

 

[CactusJacked]

8" wide wheels:
+10mm offset gives you 4.89" backspace
-6mm offset = 4.26" b.s.

7" wide wheels:
+10mm = 4.39" b.s.
-6mm = 3.76" b.s.

1.25" is a common thickness for adapters, which is going to be popping those wheels out quite a bit.

 

[Renegade5]

8" wide wheels:
+10mm offset gives you 4.89" backspace
-6mm offset = 4.26" b.s.

7" wide wheels:
+10mm = 4.39" b.s.
-6mm = 3.76" b.s.

1.25" is a common thickness for adapters, which is going to be popping those wheels out quite a bit.

would a 16x8 with 4.5 inches bs work without the spacers i mean??

 

[tommudd]

would a 16x8 with 4.5 inches bs work without the spacers i mean??

8 inch with 5 inch backspacing would but would / should and run wider 265-70-16 tires when lifted No spacer needed if right bolt pattern