Will 245\75\16 fit without lift ?

[drcham]

I have KK limited 2010 CRD
I've read almost all topics on this forum and the Internet but i am still confused.
What offset is required for this tyres ? Do i need a lift for them ?

 

[jeepin06]

They will probably, but will rub a heck of alot...

 

[Nickgt40]

Rub where, on the fenders or on the shock towers?

245/70s are available in a few tires as well.

 

[jeepin06]

they will rub on the front fender wells...when you turn the wheels slighty to full lock they will rub. i know on the front a 245 75 16 will rub on the pinch weld.

a 245/70/16 is a wider tire not taller so that might work. not really sure though. you could try a 235/70/16 if you're going to keep your Liberty at stock height. otherwise some kind of lift will be needed to fit those 245/75/16 tires. i ran a 265/75/16 MT tires with a Daystar lift kit for 2 weeks max. rub alot when making turns. now i run a set of 245/75/16 BFG KM2's with both front and rear bumpers trimmed and without the pinch weld pounded down. works perfectly fine for me and looks good too. hope that helps.

 

[HoosierJeeper]

The fender wells on the KK might be larger, but I would still choose a 245/70/16 if you're not going to be lifted soon.

 

[jeepin06]

I forgot it being a KK :disgust: LOL

Go try a 245/70/16 it will look awesome!

 

[CheroKKee]

I am an owner of a kk 2009 with an old man emu 2 inches lift, you know if I'll have any problem with tires 245/75/16 KM2 mud Terrain?

 

[rockymountain]

I am an owner of a kk 2009 with an old man emu 2 inches lift, you know if I'll have any problem with tires 245/75/16 KM2 mud Terrain?

should work. Any pics?

 

[LostKJ]

I have a kj on 245's with a 2.5 inch lift and stock wheels, it has a little rub on tight corners

 

[ChristianKline]

I have a kj on 245's with a 2.5 inch lift and stock wheels, it has a little rub on tight corners

Did you pound your pinch weld, I am going to get 4 mastercraft courser mts mounted on today and I haven't yet hope there are no problems