Latest activity
-
blackhawk replied to the thread 06 liberty won't start.Check both the ckp and camshaft. It being bad, the engine starts after several tries -
blackhawk replied to the thread ABS module rebuild.You need a reliable scanner such as autel or launch to perform the reprogram. It's done installed in the vehicle and need to perform...
-
joooooooooop replied to the thread New Jop, what should I do to it next?.How did you determine it was that -
PLike everything in life there is a happy medium… you won’t find a much better explanation than Kai’s. Pre-load 8:40 followed by brief...
-
22TALL1 replied to the thread Lift pics and spec thread.Looks great that’s how they should have looked from the factory!!! Were you able to use both washers on your Deeke’s? I’ve seen where...
-
ron.dittmer replied to the thread 2006 Liberty Sport 4x4 - Total Parking Brake Rebuild For $68.Pray and Press, The 5/16"-24 is the bolt and thread I used. The x 1 or x 2-1/4 is the length of the bolt. Either will work, but the... -
BDS 2" kit with Bilstein front shocks and Deeke UCAs - 21" front, 21 3/8" rear. -
PPray and Press replied to the thread 2006 Liberty Sport 4x4 - Total Parking Brake Rebuild For $68.Owner is inquiring about bolts and so I said i would ask you. Would these (5/16"-24 x 2-1/4) be basically what you used or these...
-
Cactus replied to the thread Lift pics and spec thread.BDS 2" kit with Bilstein front shocks and Deeke UCAs - 21" front, 21 3/8" rear. -
-
DadOSix replied to the thread 02 Power Steering leak - cannot get it sealed.Old o-ring or something stuck up in the fitting on the pump? Or a burr on the fitting - inside the pump that cuts the new o-ring when... -
JeepJeepster replied to the thread 02 Power Steering leak - cannot get it sealed.A picture would really help. -
i will tell the neighbor. i got the latch and the handle with the microswitch at a wrecking yard and installed them. When I went to shut... -
Ooldbeater replied to the thread New to jeep..i will tell the neighbor. i got the latch and the handle with the microswitch at a wrecking yard and installed them. When I went to shut...
-
KJowner reacted to fastmerc's post in the thread 2008 3.7L Questions Jeep Newbie Daughter's truck down.....! with
Like.
Thanks for the replies!!! This truck was an "unknown"...... Daughter and care of vehicles (how much she actually retained from dad... -
KJowner reacted to WesStevens's post in the thread Passenger Side (right side) Axle doesn't seem to be in all the way with Like.
Yes, there is a snap ring on the inner axle shaft. It appeared to have seated correctly, but I'm going to remove it, and put it back in...
![IMG_20250314_114038986_HDR[1].jpg](/data/attachments/70/70922-bd5540fd95c78d37f85cf2fe3ff08056.jpg)
Members online
No members online now.