KJowner's latest activity
-
KJowner replied to the thread My 2003 KJ 2.8 CRD and its problems.With the engine not running? No mine is silent, on shutdown there is a hiss/buzz from the solenoid on the left side dumping vacuum. -
KJowner replied to the thread A Driver's side Thunking Mystery.Did you try the test I posted above?
-
KJowner replied to the thread Mysterious coolant leak....????.I think it has many names!
-
This code means that the engine did not warm up to 180 degrees in 10 minutes after startup. Could be the thermostat is stuck open? Try a...
-
KJowner reacted to Johnny O's post in the thread What did you do to your Jeep today? -Wrangler Edition- with
Like.
Fall trout season off to a good start. Didn't even have to road trip as a bunch of state parks are still closed from the July storm. -
https://www.jeepkj.com/threads/project-my-crazy-jeep.51642/
-
Because mine is cup-shaped (not flat) for the stock Liberty driveshaft. I also have a spare XJ tcase with a 4bolt flat flange.
-
KJowner replied to the thread Liberty 2008????.Without looking at it it's impossible to say if it's safe, was the work on the front done recently? If so take it back. Jack the front...
-
Figured I should put this thread to bed. I finally got sick of the squeaking and reached out to Mako Driveshafts (Oakland Park, FL) for...
-
KJowner replied to the thread Mysterious coolant leak....????.The large steel plate under the engine
-
KJowner reacted to dtennes's post in the thread Misfire issues, could it be a matter of wiring best practices? with Like.
Update: #1 Fuel Injector housing was missing an insulation piece. The misfire may be the result of the connector arcing and not...
-
KJowner reacted to seafish's post in the thread Odd wobble at highway speed only when accelerating with Like.
The rear lower control arms bushings are worn out allowing front to back axle movement under acceleration. There was actually a recall...
-
KJowner reacted to ikuo78's post in the thread Do I have the parts correct for my lift kit and what is the difference between front and rear height with Like.
It is necessary if you try the coil over and find that it is not enough. Excessive amounts can be troublesome, so Usually 926 or 927 is...
-
KJowner replied to the thread Mysterious coolant leak....????.Sounds like something shrinking in the cold, I would remove the sump guard and have a good look for any dried coolant, if nothing is...
-
KJowner replied to the thread 2003 CRD cooling system parts missing ?.The other thing that makes them run hot is a faulty viscous fan coupling, the fan rotates all the time but doesn't move much air until...
