KJowner's latest activity
-
It looks like an RC 3.5 inch spacer. It is full of inconveniences when it is fully extended. I replaced it with one that doesn't have a... -
KJowner reacted to u2slow's post in the thread best replacement when rebuilding the suspsension with
Like.
Too late now. That KJ diff bracket is a new offering. My first new $80 jobber arm is still sitting standby on my shelf. 309,000km now... -
KJowner replied to the thread Project to divert KK coil to KJ.Hopefully good quality, Denso gear is usually decent. Unfortunately the Chinese are buying old names and making cheap junk to go in the...
-
I replaced the radiator because coolant was dripping at the bottom of the radiator inlet tank. The last time I replaced it was 39 months...
-
Thanks for the info. Last I drove the car the speakers sounded great. Blasting to CCR & The Stones. Reminded me of the stuff the kids...
-
KJowner replied to the thread To the audiophiles.We don't do flames on here, we are all too old and worn to care! I've not had mine in bits but I guess the amps are going to need 12v...
-
KJowner replied to the thread CRD won't start in the cold.This one shows it better. No3 is up level with the coolant cap! Replacement injector in and tested, all 4 are now flowing the same &...
-
-
Place a jack stand under the lower control arm on the other side to keep it from tilting while you jack up the lower control arm you're...
-
KJowner replied to the thread Lift problems.What did the old upper arms look like? It may have had uprated arms fitted to clear, if so you can get rebuild kits for them.
-
As you may have seen, my Jeep has got less and less willing to start in the cold weather, I've finally got some time to have a look at...
-
-
KJowner reacted to duderz7's post in the thread best replacement when rebuilding the suspsension with Like.
Or buy the IRO once and never worry about it again. The bushings, if you choose that option, are even at the proper angle for lift.
-
KJowner reacted to psyon's post in the thread Anyone have a source for a camshaft tone wheel on a 2003 Liberty 2.4L? with Like.
I was able to pound it back flat. I was just hoping to find one in case my repair, or one someone made didn't quite work and I have to...
-
Sorry this has happened. Running a stop sign.. :mad: I'd be right choked! Hopefully you find another Jeep reasonably priced.
-
This past Thursday, November 21st, I was driving to a dinner date. The was a detour due to an accident, so I ŵent down a side street...
-
KJowner replied to the thread 235/60 R16 for Jeep Liberty KJ 2005 4x4.Think you made a good choice.
