A/C has me stumped
- Thread starter siscofarms
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
siscofarms
New Member
Finally got the right parts which took 2 weeks , 
. But everything is as it should be . Blowing cold air at the right pressures . New condensor did the trick . I havent yet but I do plan on cutting into it just to see what was going on . Anyways . Thanks for advice . Sure Ill be back on here eventually for something else . I love my crd libbey but it can be a little odd to figure out sometimes and there just aint that many ,atleast around here .
. But everything is as it should be . Blowing cold air at the right pressures . New condensor did the trick . I havent yet but I do plan on cutting into it just to see what was going on . Anyways . Thanks for advice . Sure Ill be back on here eventually for something else . I love my crd libbey but it can be a little odd to figure out sometimes and there just aint that many ,atleast around here .
DadOSix
Full Access Member
Great news! I would enjoy reading your post-mortem report! Jeep on!
Nice to hear back from you, so many people post on here, get a few answers and never come back.Finally got the right parts which took 2 weeks ,
The CRDs are brilliant, just make sure you keep up with oil changes and the cambelt service.
siscofarms
New Member
yes . had it completely apart and blowed all the lines out , reassembled with new parts , and all is good now .
Turboman280
New Member
Where did you find the condenser to fit a CRD? I ordered one from Rockauto which they said would fit, but it was too wide to tuck into the intercooler like it needs to.
The CRD uses an AC condensor that is also a combined AT cooler. Mopar does not make them anymore and most people are forced to replace them with an aftermarket AC condensor and then try to fit and add an extra AT cooler.
Nissen still makes the combined unit but hey are generally out of stock,
I have an extra brand new Nissen unit that will definitely fit a KJ CRD. It is sitting in my shop and I do not need it…
PM me with your zip code if you are interested and I can make you a fair deal on it.
BigMopar440
New Member
What is the part number on the Nissan unit?
Thanks.
Thanks.
NOT Nissan … it's Nissen Part #940323
BigMopar440
New Member
940323 - Air Conditioning Condenser - Replaces JEEP 5183561AB, 05183561AA, K5143029AB 2005-2006 Jeep Liberty | AutoNationParts.com
Order Your NISSENS OEM Air Conditioning Condenser - Replaces JEEP 5183561AB, 05183561AA, K5143029AB (940323) For Your 2005-2006 Jeep Liberty Vehicle At AN Affordable Price With Nationwide Shipping!
www.autonationparts.com
BigMopar440
New Member
The one rock auto shows looks correct?
siscofarms
New Member
I got mine through Orileys . Took a few days to get it but it slid right in and all fittings were the same .
uss2defiant
Full Access Member
AC condenser with AT cooler? AT == automatic transmission?
Interesting.
The early KJ gassers have the AT cooler combined with the radiator.
Yup…the lower part of the AC condensor is separately connected to auto transmission fluid lines.
Turboman280
New Member
Yeah, I just bypassed the leaking trans cooler and installed a Hayden unit, but would like to have installed a new condenser while it was out. My old one still works though.
Similar threads
Staff online
-
LibertyTCWell-Known Member