Search results

  1. MarksmanAkula

    2003 Renegade stock bump stop replacement

    I'm not 100% sure, I just found a cheap option because I dont see the point in spending $100+ on a hunk of rubber. Rubbers rubber really. I've got Teraflex's in mine as I have the OME lift. I have however used crown parts on my jeep before, just not their bumpstops.
  2. MarksmanAkula

    2005 to 2004 Jeep Liberty full Exhaust swap over

    Can you support the transmission with a jack and remove the crossmember? Trying to remember the layout off mental image, haven't been under my jeep in awhile.
  3. MarksmanAkula

    2003 Renegade stock bump stop replacement

    Drivers side front or rear bump stop? If front : https://tinyurl.com/295xbh3x If rear : https://tinyurl.com/hp68zrhv
  4. MarksmanAkula

    2005 to 2004 Jeep Liberty full Exhaust swap over

    Most likely the exhaust setup on his 04 is trashed, and he wants to swap over a better condition 05 setup.
  5. MarksmanAkula

    Oil change

    Same stuff I use on my 07 KJ with 187,000 miles and my 01 F150 with 70,000. All around a great and well performing oil. Side note - For the 01 F150, I use 5.5QTS of 5W-20, and .5QTS of Lucas Oil Stop Leak. Stops any small drips you may have.
  6. MarksmanAkula

    2003 Liberty Lift Help - Any Advice?

    Its been reported on here many of times that daystar will not work/work correctly. The OME lift will need assembled professionally, but will be 10X better than any spacer lift.
  7. MarksmanAkula

    2003 Liberty Lift Help - Any Advice?

    Honestly your first mistake was using spacers at all. They are a terrible way to lift this vehicle. As for what's messing you up, I'm not 100% sure. When I lifted my liberty I used an OME lift, got me around 2.5" of comfortable stable lift.
  8. MarksmanAkula

    Control arm questions

    Easiest to replace the whole arm assembly Especially for the rear UCA.
  9. MarksmanAkula

    Clearance issues

    If you want underbody clearance, get a proper lift. None of that spacer BS.
  10. MarksmanAkula

    Max tire size for.....?

    Cleanest way to swap them is to swap the axle as a whole. The 4 banger Liberties had 4.10's in the same axle housings as the V6's. Just find a 4 CYL with confirmed 4.10's, pull and replace.
  11. MarksmanAkula

    Garage Air Compressor

    From above - "I have a portable air compressor so this would be more like a tank compressor to keep in the garage"
  12. MarksmanAkula

    Garage Air Compressor

    I've got one of these at home, with 2 50' lines. https://www.lowes.com/pd/Kobalt-QUIET-TECH-26-Gallon-Single-Stage-Portable-Electric-Vertical-Air-Compressor/1001014062 Works wonders for whatever I use it for. Air tools, tires, wood working, etc. Dual port with built in regulator, super quiet...
  13. MarksmanAkula

    Max tire size for.....?

    Are you willing to re-gear?
  14. MarksmanAkula

    Transfer Case Position Switch

    I did mine from below, when I was swapping cases. Dropped trans/transfer case low enough to get at it with a wrench. I would highly recommend doing it from above though.
  15. MarksmanAkula

    Painting my grill?

    Ive got a jet black Liberty that came with the black grill. I swapped it out for a chrome grill. still have the black one.
  16. MarksmanAkula

    What did you do to your jeep today?

    Had time to get the PCV hose on the 07. By far easiest swap/install of a part I've ever done on this vehicle. Not even a 5 minute swap.
  17. MarksmanAkula

    Looking for part of interior door

    Junk yard will be your best option. My liberty was missing the same part when we bought it, and a local yard had a nice liberty in stock, that I ended up pulling all 4 door panels from.
  18. MarksmanAkula

    What did you do to your jeep today?

    Recieved my hose in the mail today. Exact same part #. Will put it on either tonight or later this week.
  19. MarksmanAkula

    What did you do to your jeep today?

    Thank you. Ordered one just now, should have it this coming Monday. Will report on how it goes
  20. MarksmanAkula

    What did you do to your jeep today?

    I lost the previous thread, do you still have the part# for that hose?

Random media

IMAG0027
This is what you call "Cool" JBA 4.5 Upper Control Arms! They really work to obtain a better alignment once lifted. Jeep handles like a sports truck
The back.....
Minor mod, bought some cheap little seat covers. Nothing fancy, just basic protection.
Εικόνα 0099
13083133 1170561872988796 3505602683783144099 n
Out & About in the Mountains in 4 WD !
Is it coming from the heater 'sockets' ?
Avon

Latest posts

Members online

Total: 341 (members: 2, guests: 339)
Top